ABB TTF200 and TTF300 Model Temperature Transmitter

With TTF200 and TTF300 field-mount temperature transmitters, ABB offers cost-effective solutions for both standard applications and applications that are more demanding. A version with stainless steel housing allows it to be used in harsh ambient conditions at temperatures down to –50 °C (–58 °F). The devices are available with an indicator, which optionally also allows configuration on site without additional handheld terminal. Sensor redundancy, sensor drift monitoring and freestyle characteristic are available. The TTF300 comes with an optional wireless model, the TTF300-W.

Please contact me get more information

Email:Mia@cwlyautomation.com

VK/Whatsapp/Telegram:+8613667120925

Website: 

PRODUCT DETAILS

TTF200

Field Mountable

One Sensor Input

Resistance thermometers, resistance-type remote sensors (0 to 5000 Ohm)

Thermocouples, voltages, mV-voltages (–125 to 1100 mV)

Pt100, two-wire, three-wire, four-wire, thermocouple with internal reference junction

Continuous sensor monitoring and self-monitoring

Supply voltage monitoring

Wire break and corrosion monitoring

Sensor error adjustment

Electrical isolation

Transmitter-controlled graphical indicator

LCD indicator for process value, sensor value and actual value

HART Configurable

TTF300

Wireless option available

Field mount, single-compartment housing, two cable glands

Two sensor inputs

Resistance thermometers, resistance-type remote sensors (0 to 5000 Ohm)

Thermocouples, voltages, mV voltages (–125 to 1100 mV)

Pt100, two-wire, three-wire, four-wire, thermocouple with internal reference junction

2x Pt100 two-wire and three-wire, 2x thermocouple or 1x Pt100 two-wire, three-wire, four-wire and 1x thermocouple

Continuous sensor monitoring and self- monitoring

Supply voltage

Wire break and corrosion monitoring

Sensor error adjustment

Electrical isolation

Specific linearization

Callendar-Van Dusen coefficient, value pair table / 32 points

Transmitter-controlled, graphical LCD indicator with dual function

Configuration of the transmitter via buttons

Process, sensor and actual values display

HART Configurable

Example Configuration

TTF300.L3.C.2.H.BS.K2.T0.M5

TTF300: Field mounted, Pt100 (RTD), thermocouples, electrical isolation

L3: Explosion protection- FM Explosion Proof (XP): XP, DIP, Class I, II, III, Div. 1+2, Groups A-G, factory sealed

C: Housing/display- single-compartment housing (aluminum) / with LCD display HMI

2: Cable entry- thread 2 x 1/2″ NPT (National Pipe Thread)

H: Communication protocol- HART, programmable, output signal 4-20mA

BS: Configuration- standard

K2: Mounting bracket- wall mounting / 2” pipe mounting bracket (stainless steel)

T0: Device identification plate- plate stainless steel