ABB AC 800M and S800 IO power supply SD853 3BSE088188R1

The SD85x Power supply units are designed for high efficiency, electronic inrush current limitation, wide operating temperature range, and extraordinarily small size. The lowest power losses and high lifetime expectancy deliver the lowest cost of ownership.

The SD85x series complies for use in potentially explosive atmospheres (IECEx Zone 2, ATEX Zone 2, and Class I Div 2). The SD85x series has a built-in power reserve and can easy breaking fuses due to high overload peak current capability.

Please contact me get more information

Email:Mia@cwlyautomation.com

VK/Whatsapp/Telegram:+8613667120925

Website: 

General info

Article number 3BSE088188R1

Type Power supply

Rated output current 10 A

Rated output power 240 W

Rated output voltage 24 V d.c.

Mains/input voltage, nominal 100-240 V a.c. 110-150 V d.c.

Applications SELV and PELV

Efficiency 93.6/95.2 % @ 120/230 V a.c.

Detailed data

Mains frequency 50 - 60 HZ +/- 6%

Load sharing Parallel connection

Supervision relay Yes

Power Factor (at rated output power) 0.99/0.97

Heat dissipation 16.4 W / 12.1 W, 120/230 V a.c.

Output voltage regulation at max. current max 50 mV 0 - 12 A

Maximum ambient temperature 70 °C

Primary: Recommended external fuse 10-20 A

Secondary: Short circuit Hiccup (2s on 18s off)

Output over voltage protection Max 32 V DC

AC input current 2.15 / 1.13 A

AC inrush current 6 A / 9 A peak

Please contact me get more information

Email:Mia@cwlyautomation.com

VK/Whatsapp/Telegram:+8613667120925

Website: 

Environment and certification

CE mark Yes

Electrical safety IEC 60950-1

ATEX Zone 2 Yes

IECEx Zone 2 Yes

Hazardous Location, Class 1 Div 2 Yes

Hazardous Location ATEX Zone 2: EN 60079-0, EN60079-15; IECEx Zone 2: IEC 60079-0, IEC 60079-15; CSA Class I Div 2, Groups A, B, C D T4: ANSI/ISA 12.12.01-2015, C22.2 No. 213-M1987

Marine certification DNV-GL, ABS

Protection rating IP20 according to IEC 60529

Corrosive atmosphere ISA-S71.04 G3

Pollution degree Degree 2, IEC 62477-1

Mechanical operating conditions IEC 61131-2

EMC EN 61000-6-4 and EN 61000-6-2

Overvoltage Categories Category III (IEC 62477-1 for altitudes up to 2000 m)

Equipment class I PE (Protection Earth) connection required

Max ambient temperature -25 °C (-13 °F) to +70 °C (158 °F), derating 6W / °C between 60 °C - 70 °C

RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)

WEEE compliance DIRECTIVE/2012/19/EU

Dimensions

Width 39 mm (1.53")

Depth 117 mm (4.60")

Height 124 mm (4.88")

Weight (lbs.) 600 g (1.32 lbs.)

Mounting spacing W mm 15 mm (0.59")

Mounting spacing H mm 40 mm (1.57")

Features and benefits

DIN-rail mounting, Width 39 mm

Efficiency up to 95.2 %

20% Output Power Reserves

Easy Fuse Breaking due to High Overload Peak Current

Active Power Factor Correction (PFC)

Minimal Inrush Current Surge

Temperature range -25°C and +70°C (derating 6W / °C between 60°C - 70°C)

DC-OK Relay Contact

Class I Div 2, IECEx Zone 2 and ATEX Zone 2

Please contact me get more information

Email:Mia@cwlyautomation.com

VK/Whatsapp/Telegram:+8613667120925

Website: 

ABB AC 800M and S800 IO voter SS822ZSS822Z 3BSC610055R1 

ABB AC 800M and S800 IO power supply SD854SD854 3BSE088189R1

ABB AC 800M and S800 IO power supply SD853SD853 3BSE088188R1 

ABB AC 800M and S800 IO power supply SD834SD834 3BSC610067R1 

ABB AC 800M and S800 IO power supply SD833SD833 3BSC610066R1 

ABB AC 800M and S800 IO power supply SD832SD832 3BSC610065R1

ABB AC 800M and S800 IO power supply SD831SD831 3BSC610064R1

ABB AC 800M and S800 IO power supply SD822ZSD822Z 3BSC610054R1

ABB AC 800M and S800 IO rechargeable battery unit SB822SB822 3BSE018172R1