LTT-01 Loop Tack Tester

Application

Loop tack test is applicable to those adhesives that form a bond of measurable strength rapidly upon contact with another surface. Tack force is the force measured as the force required to separate the adhesive from the adherend at the interface shortly after they have been brought into contact under a load equal only to the weight of the pressure-sensitive article (for example, tape, label, sticker, etc.) on a 1 in.2 contact area.sealing process by controlling these parameters.

LTT-01 Loop Tack Tester is designed to measure the sticking force, adhesiveness, and tack of adhesives, tapes, and labels. It complies with renowned test methods such as FINAT Test Method No. 9, PSTC-16 Loop Tack, and ASTM D6195.

The LTT-01 loop tack tester is indispensable in various industries where adhesive performance is critical.

Test Principle

A strip sample, 25mm wide and 175mm long, is formed into a loop and brought into contact with a glass plate at a controlled speed of 300mm/min. Immediately after contact, the loop is withdrawn at the same speed, and the maximum force required to separate the loop from the glass plate is recorded, defining the loop tack.

Standard

FINAT Test Method No. 9, PSTC-16 Loop Tack, and ASTM D6195

Technical Features

7-inch Touch Screen: Intuitive HMI touch screen for user-friendly navigation.

PLC Control: Equipped with a PLC control unit for advanced and precise testing.

Precision Ball Screw: Ensures accurate speed and displacement for reliable results.

Customizable Parameters: Adjust speed, stroke, and dwell time for tailored testing.

Enhanced Safety: Features a limiting device and automatic returning for added safety.

Microprinter: Built-in dot-matrix type for easy output of test results.

Compliant Glass Plate: Standard-complied float glass plate included for accurate testing.

Configuration

Standard configuration: LTT-01 Loop Tack Tester, glass panel, upper jaw, lower jig, fuses, manual, calibration certificate, power cord.

Optional configuration: stainless steel panel, RS 232 Port, COM Line, Software

Main Parameters