Low-cost GSM/3G/4G/GPRS Industrial Wireless Gateway Router for Tunnel Wireless Remote Monitoring
USD $129.936 - $151.548 /Piece
Min.Order:1 Piece
POE-Powered R40 4G Edge Computing Router for Industrial Automation and Remote Control
4G Industrial Router R40 with 2 Serial Ports and Modbus Master for Data Collection and Control
Ethernet Remote I/O Data Acquisition Module with 2DI+2DO+1RS485 for Industrial Automation
M100E Series Rugged Ethernet IO Data Acquisition Modules for Unattended Computer Rooms
Rugged I/O Module Modbus TCP to MQTT Protocol 8-Channel Analog Input 4-20MA for PLC
8CH Optocoupler Isolation Digital Input Module with AI AO RS485 for Remote Monitoring System
Brief Introduction
R40 is an industrial edge router, compatible with 4G/3.5G/3G/2.5G network, flagship
configuration, VPN link, industrial protection, wide temperature, wide voltage design, easy to set up high speed, stable. The wireless transmission network uses the public LTE network to provide users with wireless long-distance data transmission, can be used in multiple industrial applications.
It is an industrial-grade multifunctional Internet of Things terminal device that supports POE power supply, comes with IO input and output, with 2 serial ports, supports transparent transmission, Modbus Master protocol for expanding IO and connecting PLC and other devices. It adopts dual SIM card redundancy design to ensure stable and reliable data transmission, supports MQTT protocol and Modbus protocol, SNMP protocol and is compatible with most PLC protocols, greatly simplifying on-site wiring construction costs and reducing operation and maintenance costs.
High-performance industrial-grade edge router adopts 32-bit processor, developed based on Linux system, supports GSM/2G/3G/4G/GPRS/EDGE/WCDMA/HSPA+/LTE network, provides high-speed wireless network bandwidth for the device through wireless connection, and has automatic detection of network disconnection, automatic restart of dial-up failure, and scheduled restart to ensure network stable connection.
Main Features
Ø DIN(2 channel) :Support NO/NC/counting input, frequency<100, can set counting threshold, support alarm trigger.
Ø DO(2 channel): Can be set according to the trigger condition.
Ø AIN(4 channel): Support 0-5V, 0-20mA, 4-20mA, can set threshold value, support alarm trigger.
Ø Support SMS to query DI/DO/AI status and value, and set DO status;
Ø Support 4G wireless Internet access function, can set APN and other parameters;
Ø Two SIM card slots, support dual card switching;
Ø Support GPS, positioning data can be released through MQTT;
Ø VPN: Support L2TP, IPSEC, OPENVPN and other VPN protocols.
Ø Interface: Support RS485 and RS232 serial port transparent transmission and MODBUS RTU to TCP, Support MODBUS master, can regularly read MODBUS slave node data through RS485, RS232 and Ethernet.
Ø Support address mapping, mapping RS485, RS232 and Ethernet access device addresses to router local addresses.
Ø Support monitoring the online status of network devices connected to the LAN port, which can be reported to the platform through MODBUS or MQTT.
Ø Link switching: Support WAN port and 4G network connection switching, preferentially use WAN port wired network.
Ø Network management: Supports SNMPV1 / V2C.
Ø Platform connection: Support MODBUS and MQTT protocols, MQTT supports SSL encryption.
Ø Alarm: Supports SMS and e-mail alarm.
Ø Timer: Support one-time timer and period timer.
Ø Logic operations: Support Boolean and numeric logic operation, also support conditions and arithmetic logic operations;
Ø Upgrade: Support remote upgrade through web page
Technical Parameters
Item | Parameters | Description |
Power Supply | Input voltage | 9~57VDC |
Input current | Normal: 240mA@12V, max: 800mA@12V | |
Connection | 5.08mm terminals | |
Protection | Anti-reverse connection Protection | |
WAN | Qty | 1 |
Interface Spec | RJ45,10/100Mbps, Automatically adapted to MDI/MDIX | |
Protection | ESD ±30kV(contact), ±30kV(air) EFT 40A(5/50ns) Lightning strike 24A(8/20µs) | |
LAN(POE) | Qty | 3 |
Interface Spec | RJ45,10/100Mbps, Automatically adapted to MDI/MDIX | |
POE(optional) | Supports 3 POE power output compatible IEEE802.3at/af Single POE maximum output power 30W With power management function Voltage range 48~57V | |
Protection | ESD ±30kV(contact), ±30kV(air) EFT 40A(5/50ns) Lightning strike 24A(8/20µs) | |
Serial Port | Qty | 2 |
Type | 1 RS485, 1 RS232 | |
Baud rate | 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 230400 | |
Data Bit | 5, 6, 7, 8 | |
Parity Bit | None, Even, Odd | |
Stop Bit | 1, 2 | |
Working mode | Data transparent transmit, Modbus RTU to TCP, Modbus master, Modbus slave | |
Protection | ESD(contact): 8KV Surge: 4KV(8/20us) ESD ±8kV(contact), ±15kV(air) EFT 4KV, 40A(5/50ns) | |
Console | Qty | 1 |
Type | CONSOLE | |
Interface Spec | RJ45 | |
Protection | ESD:±8kV(contact), ±15kV(air) | |
USB (Reserved) | Qty | 1 |
Type | USB2.0(HOST) | |
Protection | ESD ±8kV(contact), ±15kV(air) | |
WIFI | Antenna qty | 2 |
Antenna type | SMA | |
Protocol | 802.11a/b/g/n (mixed) | |
Mode | AP mode, client mode | |
Frequency | 2.4G | |
Channel | Channel 1 - 13 | |
Security | Open, WPA, WPA2 | |
Encryption | AES, TKIP, TKIPAES | |
Connection number | 16(Max) | |
Speed | 300Mbps(Max) | |
Transmit Distance | Outdoor non-blocking/opening, covering up to 20 meters | |
SSID Broadcast Switch | Support | |
Cellular Network | Antenna Port Qty | 1 |
Antenna Port Type | SMA | |
4G(L-E) | GSM/EDGE:900,1800MHz WCDMA:B1,B5,B8 FDD:B1,B3,B5,B7,B8,B20 TDD:B38,B40,B41 | |
4G(L- AU) | GSM/EDGE:850,900,1800MHz WCDMA:B1,B2,B5,B8 FDD:B1,B2,B3,B4,B5,B7,B8,B28 TDD:B40 | |
4G(L-A) | WCDMA:B2,B4,B5 FDD:B2,B4,B12 | |
4G(L-V) | FDD:B4,B13 | |
4G(L-J) | WCDMA:B1,B3,B8,B18,B19,B26 FDD:B2,B4,B12 TDD: B41 | |
4G(L-CE) | GSM/EDGE:900,1800MHz WCDMA:B1,B8 TD-SCDMA:B34,B39 FDD:B1,B3,B8 TDD:B38,B39,B40,B41 | |
SIM | Qty | 2 |
Interface Spec | Drawer interface, supports 1.8V/3V SIM/UIM (NANO) | |
Protection | In-built 15KV ESD Protection | |
GPS (optional) | Antenna qty | 1 |
Antenna type | SMA | |
Tracking Sensitivity | > -148 dBm | |
Horizontal Accuracy | 2.5m | |
Protocol | NMEA-0183 V2.3 | |
Digital input | Qty | 2 |
Type | Switch contact signal (dry node) or level signal (wet node) | |
Range | 1: High level, 5~30VDC, close signal 0: low level 0~1VDC open signal | |
Pulse frequency | Max 100Hz | |
Protection | Isolation voltage 3750Vrms | |
Digital output | Qty | 2 |
Type | SINK output | |
Load voltage | Max 50VDC | |
Load current | 500mA(single), 625mW | |
Protection | EFT: 40A(5/50ns) | |
Analog input | Qty | 4 |
Type | 0~5V,4~20mA,0~20mA | |
ADC Resolution | 16bit | |
Protection | EFT: 40A(5/50ns) | |
Indicator light | ALARM | Alarm indicator light |
SYS | System running status indicator | |
4G | 4G status indicator | |
WiFi | WiFi status indicator | |
DO1, DO2 | Digital output indicator light | |
DI1, DI2 | Digital input indicator light | |
System | CPU | MIPS CPU, Clock Speed 580Mhz |
Storage | 16MB (Scalable to 32MB) | |
RAM | 128MB (Scalable to 256MB) | |
Software | Network Protocol | PPP, PPPoE, TCP, UDP,DHCP, ICMP, NAT, HTTP, HTTPs, DNS, ARP, NTP, SMTP, SSH2, DDNS,SNMP etc. |
VPN | Ipsec, OpenVPN, L2TP | |
Firewall | DMZ, DoS defense, IP packet, Domain name and MAC address filtering, port mapping, access control | |
Remote Management | Support web remote configuration | |
System Log | Support | |
Firmware Upgrade | Support serial port local TFTP/web firmware upgrade | |
Certificate | EMI | EN 55022: 2006/A1: 2007 |
EMS | IEC(EN)61000-4-2(ESD) IEC(EN)61000-4-3(RS) IEC(EN)61000-4-4(EFT) IEC(EN)61000-4-5(Surge) IEC(EN)61000-4-6(CS) IEC(EN)61000-4-8 | |
MTBF | 100,000 hours | |
Others | CE, FCC, ROHS, 3C | |
Working Environment | Working temperature | -40~85℃ |
Storage temperature | -40~105℃ | |
Humidity | 5~95%RH | |
Others | Enclosure | Metal |
Size | H145mm * L110mm * W45mm | |
IP level | IP30 | |
Net weight | 790g | |
Installation | Wall-amount/Rail-amount |
1.7 Model Selection
Model | Serial Port | WAN | LAN | WIFI | Digital input | Digital output | Analog input | Extend function |
R40 | 1RS485,1RS232 | 1 | 3 | √ | 2 | 2 | x | Modbus slave/MQTT |
R40A | 1RS485,1RS232 | 1 | 3 | √ | 2 | 2 | x | Modbus master/slave/MQTT |
R40B | 1RS485,1RS232 | 1 | 3 | √ | 2 | 2 | 4 | Modbus master/slave/MQTT |