Product Details

BL200 series product is Edge I/O System for data acquisition and industrial control.

The system consists of two parts : Edge I/O controller and distributed I/O modules group.

Various types I/O modules are optional, for example digital, analog and others particular use. The Edge I/O controller supports various Fieldbus protocols such as Modbus, MQTT, OPC UA, Profinet, EtherCAT, BACnet etc.

he Edge I/O system is design based on powerful microprocessor 32-bit ARM926EJ-S™ and uses Linux operating system. It can quickly access to industrial field device and software (such as PLC, MES, SCADA and ERP systems), but also able connect to various cloud platforms (AWS IoT Cloud, Thingsboard, Ignition, Huawei Cloud, and Alibaba Cloud).

It supports programmable logic control, edge computing, customization applications, very suitable for IIoT and industrial automation.

In addition, the device also provides SDK, allowing users to carry out secondary development to meet the needs of the fragmented applications in niche market.

In the industrial field communication, the edge I/O system is considered as a Fieldbus node. The communication between the node and field devices (eg PLC) is through the Ethernet port of Edge I/O controller. The communication between the edge controller and the I/O modules is via the board bus locally insides device.

The two RJ45 Ethernet ports of the BL200 have integrate the switch function inside, which can establish a linear topology without the need for additional switches or hubs.

Two sets of independent power supplies are used to supply 24V DC to the edge controller and I/O modules group respectively, therefore they are electrically isolated from each other.

When people assemble I/O modules, each I/O module can be arranged in any sequence combination. it is not required to be grouped by module type. However, a terminal module (identified as TERM) must be inserted at the end so as to ensure data transfer properly.

People can configure BL200 parameters through web browser for testing the device.

BL200 is especially suitable for distributed application scenarios, because BL200 can be cascaded with each other through Ethernet cables. various I/O modules can be distributed on different floors of different buildings in different locations according to user needs.

The whole system has the characteristics of easy expansion, easy configuration, convenient network wiring and high reliability, can be widely used in

industrial automation/industry 4.0/smart factories,

smart building HVAC/smart parking lots/smart communities,

sewage treatment plants,

new energy power generation Factory (solar photovoltaic, wind power generation)

name	parameter	describe
Power supply to I/O controller	Input voltage(system)：	24 VDC
	Input current(system)：	Max. 500 mA@24VDC
	Power Efficiency	84%
	Internal bus voltage	5VDC
	controller consumption current	Max. 300mA@5VDC
	I/O consumption current	Max. 1700mA@5VDC
	Isolation protection	500 V system/supply
Power supply to I/O modules	Input voltage (field)	24 VDC
Power supply to I/O modules	Power supply current across contacts (Max.)	10 ADC
Ethernet	Number	2 X RJ45
	Transmission medium	Twisted Pair STP 100 Ω Cat 5
	Max. cable length	100m
	Baud rate	10/100 Mbit/s
	Isolation protection	ESD contact: 8KV ，surge: 4KV（10/1000us）
I/O controller System	Operating system	Linux
	Processor	ARM926EJ-S
	CPU	300MHz
	RAM	64MB
	Flash	128MB
	Number of I/O modules	Max. 32
	Process mapping data points serial module(Modbus)	l Bool : 4096 l 16 Bit : 2048 l 32 Bit : 1024
	Protocols	Modbus TCP , MQTT , OPC UA , HTTP , BootP , DHCP , DNS , SNTP , SNMP
	Max. number of socket links	15 Modbus TCP
Field Wiring	Connection technology	CAGE CLAMP®
	wire cross-section	0.08 mm² ⋯ 2.5 mm², AWG 28 ⋯ 14
	Strip length	8 mm ⋯ 9 mm / 0.33 in
Working Environment	operation	0 ⋯ 55 °C
	storage	-40 ⋯ 70 °C
	Relative humidity	Max. 5%⋯95% without condensation
	Operating altitude	0 ⋯ 2000 m
	Protection type	IP20
Product Size	Width	48mm
	Length	100mm
	High	69mm
Material	color	Light grey
	Shell material	Polycarbonate, Nylon 6.6
	Fire load	1.239 MJ
	Weight	180 g
Mechanical	Mounting type	DIN-35 rail
Certification	EMC	EN 55022: 2006/A1: 2007 (CE &RE) Class B
		IEC 61000-4-2 (ESD) Level 4
		IEC 61000-4-3 (RS) Level 4
		IEC 61000-4-4 (EFT) Level 4
		IEC 61000-4-5 (Surge)Level 3
		IEC 61000-4-6 (CS)Level 4
		IEC 61000-4-8 (M/S) Level 4

No.	Name	Model	Channel	Signal type
1	Digital Input Module	M1082	8	NPN
2	Digital Input Module	M1081	8	PNP
3	Digital Output Module	M2082	8	NPN
4	Digital Output Module	M2081	8	PNP
5	Analog Input Module	M3041	4	Current
6	Analog Output Module	M4043	4	Voltage
7	RTD Input Module	M5041	4	Resistor
8	Serial port Interface Module	M6021	2	RS485
9	24V Power Supply Module	M701	/	/
10	Terminal Module	M801	/	/
11	Modbus-TCP I/O controller	BL200	/	/
12	OPC UA I/O controller	BL200UA	/	/
13	MQTT I/O controller	BL200M	/	/
14	Multiprotocol I/O controller	BL200Pro	/	/
15	Profinet I/O controller	BL200PN	/	/
16	Ethernet/IP I/O controller	BL200EP	/	/
17	EtherCAT I/O controller	BL200EC	/	/
18	BACnet/IP I/O controller	BL200BN	/	/