qita, buy PXIe-1084 data collector on China Suppliers Mobile

Product Details

Product Overview:

Input points: 16

Output points: 0

Input specifications:

Input method: drain type/source type

Signal voltage: DC24V

Impedance: 4.3K Ω

Signal current: 5mA/DC24V

ON state current: above 3.5mA

OFF state current: below 1.5mA

Response time: approximately 10ms

Signal form:

Voltage free contact input

For drain type input: NPN type transistor with open collector form

Source input: PNP type transistor, open collector form

Circuit insulation: optocoupler isolation

Physical connection: non detachable terminal strip

Action indication: When the optocoupler is driven, the LED light on the panel lights up

1 Overview

The ARTU series remote terminal units are high-performance intelligent components for power distribution, applied in fields such as intelligent power distribution and industrial automation. The ARTU100 series remote terminal unit provides switch input, switch output, analog input, and analog output. It can transmit the collected signals to the background through RS485 serial port, RJ45 Ethernet interface, 2G, Lora, and 4G wireless communication. The application of ARTU four remote unit switch value acquisition module in low-voltage intelligent distribution.

Compliant with standards:

GB/T 19582.1-2004

Industrial automation network specification based on Modbus protocol Part 1: Modbus application protocol

GB/T 19582.2-2008 Industrial Automation Network Specification Based on Modbus Protocol Part 2: Implementation Guidelines for Modbus Protocol on Serial Links

GB/T13729-2002 Telecontrol Terminal Equipment DL/T630-1997 Technical Conditions for AC Sampling Telecontrol Terminals DL/T 634.5101-2009 Telecontrol Equipment and Systems Part 5-101: Transmission Regulations DL/T 634.5104-2009 Telecontrol Equipment and Systems Part 5-104: Transmission Regulations

Contact information: 15359293870

WhatsApp:+86 15359293870

Contact person: KELLY

Email: geabbdcs@gmail.com 386353502@qq.com

Official website:

Data electrical interface:

*The BNC-F coaxial interface form complies with the protocol specifications of ControlNet

*Supports the ControlNet bus standard

*Communication rate: 5Mbit/s

*Equipped with 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection functions;

*Terminal resistance: This product has a built-in 75 ohm terminal resistance

*Signal delay (electrical port) 5us

Fiber optic interface:

*Fiber wavelength: multimode 850nm, 1310 nm; Single mode 1310 nm, 1550 nm.

*Transmission fiber: multimode 50/125 um, 62.5/125 um, 100/140 um; Single mode 8.3/125um, 9/125um, 10/125um.

*Transmission distance: Multi mode 2Km, single mode 20Km, optional for further distances.

*Fiber optic interface types: SC, FC, ST optional, standard SC optical interface.

*Optical path error rate:<10-9

*Signal delay (optical port): 2.3us

Power supply and protection:

*Power supply: Dual power redundant input, DC (9-36) V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function, industrial terminal interface

*Relay alarm output: Fiber optic link fault and power supply fault alarm output, contact capacity: DC48V/1 A, industrial terminal interface

Mechanical characteristics:

*External dimensions: (147x118x54) mm

*Shell: IP30 protection level, corrugated aluminum reinforced casing

*Installation method: 35mm guide rail installation

*Net weight: 800g

Work environment:

*Working temperature: (-10~+70) ℃, optional wide temperature (-40~+85) ℃

*Relative humidity: ≤ 90% (non condensing)

*Storage temperature: (-40~+85) ℃