Product Description:

The front panel of the AT-8000S/48 is configured as follows:

48 10/100Mbps ports - RJ-45 ports are specified as 10/100Base-T. RJ-45 Port Indicates a port

Ports 1 to 48.

•2 10/100/1000Base-T copper ports - There are two 10/100/100Base-T copper ports specified in

The switch functions as 49R and 50R ports. These ports are paired with the two SFP optical interface slots specified on the switch

Ports 49 and 50. Together, these four ports form the Combo port shown in Figure 9.

•2 SFP ports - there are two SFP slots supporting 100Base-FX or 1000Base-X(fiber)

Connect and specify ports 49 and 50 on the switch. This SFP slot is paired with two 10/100/ ports

1000Base-T Copper port. The port can be 49R or 50R on the switch. These four ports together

Form a Combo port as shown in Figure 9.

AT-8000S/48POE Rear panel

Product model:

ABB

4690.1.2.1.1.3.0.3.1. / STD

turbidity analyser

ABB

57120001-CV

connection unit

ABB

57360001-HG

Memory Board

ABB

58052914

Volttage Means Unit

ABB

58063673

resistor

ABB

58921718

protection card

ABB

6132095

Gray Encoder Board

Business scope:

PLC,DCS,PAC, industrial computer, programming control PC, frequency conversion system, servo system, human-machine interface HMI, transmission and sensing system and other accessories supply, low-voltage electrical appliances, electrical connection, panel cabinet, power supply, industrial safety SCADA, automation software, information, industrial Ethernet, fieldbus, field instrumentation, wireless communication, low-voltage inverter, High voltage frequency converter, motion control, mechanical transmission, motor, machine vision, sensor, display control instrument, analytical test instrument.

After-sales service:

1. The key customer base is an important part of the survival and further development of the enterprise. Through the return visit and communication of the key customers, the customer demand is gradually improved and the customer satisfaction is improved

2 Due to human factors (self-disassembly, fall or external impact, etc.), irresistible factors (such as natural disasters, etc.) improper storage (rats, liquid infiltration, etc.) caused by computer failure, not free warranty service.

3 Damage to electronic components such as chips and capacitors due to voltage, or failure or damage caused by use in working environments other than those specified in the product manual (such as excessively low ambient temperature; The environment is too wet or dry; Voltage or current instability, etc.), not free warranty service.