Product Details

ADL200 MID Single-phase DIN Rail Energy Meter

ADL200 single-phase electronic watt-hour meter is mainly used to measure single-phase active energy in low-voltage networks. It can also measure voltage, current, power, and other electricity. It can also be equipped with an RS485 communication function to facilitate users to monitor, collect and manage electricity consumption. It can be flexibly installed in the distribution box to realize the sub-item electric energy measurement, statistics, and analysis of different areas and different loads. The product meets the requirements of the national standard GB/T17215.321-2008 and the enterprise standard Q31/0114000129C035-2017 "Enterprise Standard for Rail Mounted Electric Energy Meters".

Picture	Specification	Optional
	● Measurement: 1-phase AC kWh, Active Power, Current, Voltage and etc ● Accuracy: 1.0% (kWh) ● Frequency: 45~65Hz ● Rated Voltage: 220~264Vac (direct connect) ● Rated Current: 10(80)A AC (direct connect) ● Communication: RS485 (MODBUS-RTU) ● Dimension: 903665mm (LWH) ● Installation: 35mm DIN Rail ● Standard&Certificate: IEC; CE;CE-MID;EAC	● Multi-rate/tariff: 4 Tariff Rates and etc

Diverse Electricity Parameters Measurement

● U (Voltage)

● I (Current)

● P (Power)

● Q (Reactive power)

● S (Apparent power)

● PF (Power factor)

● kWh (Kilowatt-hours)

● kVarh (Kilovar-hours)

Multi-rate/Flexible Tariff

● 4 Time zone

● 4 Tariff rate (Spike, Peak, Flat, Valley)

● 2 Time period list

● 14 Time period by day

HMI for Parameters Setting

● Code

● Protocol

● Address

● Baud rate

● Parity

● All Display

1. Function

Function	Function description	Function provide
Measurement of kWh	Single-phase active kWh (positive and negative)，3 months historical energy data frozen storage	■
Measurement of electrical parameters	Voltage, Current, Active power, Reactive power, Apparent power, Power factor and Frequency	■
LCD Display	8 bits section LCD display	■
Key programming	3 keys to set parameters like code, address, baud rate, multi-tariff and communication protocol	■
Pulse output	Active energy pulse output	■
Multi-tariff	Adapt 4 time zones, 2 time interval lists, 14 time interval by day and 4 tariff rates	□F
Communication	Communication interface: RS485, Communication protocol: MODBUS-RTU	■

(■：Standard；□：Optional)

2. Technical parameter

Input voltage	Reference voltage	AC 220V
	Reference frequency	50Hz
	Power consumption	<10VA
Input current	Basic current	10A
	Maximum current	80A
	Starting current	4‰Ib
	Consumption	<4VA
Measurement performance	Accuracy of measuring	1 class
Measurement performance	Range of measuring	000000.00~99999999kWh
Clock accuracy		Error≤0.5s/d
Active pulse	Pulse width	80±20ms
Active pulse	Pulse constant	1000imp/kWh
Communicati on	Interface	RS485(A+、B-)
	Connection mode	Shielded twisted pair conductors
	Protocol	MODBUS-RTU