Product Details

Product Introduction

IMO 1000m3/h Ship UV Ballast Water Management System BWMS uses advanced full-automatically backwash filter, with high-efficient medium-pressure UV radiation technology to accomplish the online treatment of ship ballast water. LS BWMS has been type approved in accordance with MEPC.300(72) aka new G8 and BWMS Code by China Classification Society (CCS) and fully meet “D-2” discharge standard.

IMO 1000m3/h Ship UV Ballast Water Management System BWMS offers simple operation and simple maintenance, dual-directional (local and remote) automatic control, friendly interface, and easy manipulation. The system is in unit-modular design with a capacity range from 150～3000m³/h, thus providing flexible and simple installation on small tonnage vessels while multiple units assembled installation on large-tonnage vessels. Therefore, it takes no large space. Meanwhile, the system is also suitable for old ships with narrow space.

The filtration plus UV radiation method takes no additional contamination with no adding or reserving chemicals. The entire system is completely closed in operation thus causing no hazards of radiation or noise to the crew.

System control can be realized through the optional remote control box for local and remote two-way control. Meet on-site and remote operation. The whole process is convenient, intuitive and reliable. The system working data can be stored and recorded to reflect the operation of the equipment during the ship's voyage, and can provide working operation records according to the requirements of the inspection department, with long-term traceability.

Working Principle

The System includes Filter, UV Reactor, Control Unit, Power Cabinet, and Electric Valves, monitoring equipment, sampling device and pipeline. General working modes include ballasting and de-ballasting processes, as well as ballast stripping and emergency bypass.

Technical Specification

Model	LS-1000
Capacity ( m³/h):	1000
Filter × Qty:	LSF-1000 ×1
UV Reactor × Qty:	LSV-1000 × 1
Control Unit × Qty:	LSC-1L × 1
Power Cabinet × Qty:	LSP-1 × 1
Rated Power (kW)*:	~18

Power Consumption

Component	Power Consumption (kW)
Component	Continuous loads	Intermittent loads
Power cabinet	13	0.5
Control Unit	1.0	0.5
Backflush pump	/	3
sub-total	14	4
Total	18

Working Conditions

Working Conditions	Humidity	0～95％ (Equipment in Engine Room)
	Ambient temperature	0～55 ℃
	Seawater temperature	0～35 ℃
Slope & Swing	Static	All directions ≤22.5°
Slope & Swing	Dynamic	All directions ≤22.5°
Electromagnetic Compatibility	Voltage floating	±10%
	Instantaneous voltage floating	±20%
	Frequency floating	±5%
	Instantaneous frequency floating	±10% (Recover in 3 seconds)
Power Supply	380(440)V, 50(60)Hz, 3Φ
Fresh Water	About 2.0 m³ / time	For replacing seawater in BWMS when storage
General Requirement of Relevant Piping	Shipbuilding standard are mandatory regarding relevant piping, sampling facilities and pipes used along for firefighting, and shall be easy to clean, inspect, service and operate. The freshwater piping shall not be mixed up with seawater and piping design pressure shall not exceed 1.0MPa.
Electrical Requirements	The cable connected to the system shall be approved marine cable.

Main Model List

Model	Rated Capacity (m3/h)	Capacity Range (m3/h)	Power (KW)	Weight (Ton)	Length (mm)	Width (mm)	Height (mm)
BWS-150	150	50-150	22	1.5	2600	1000	1700

BWS-250	250	150-250	26	2.2	2400	2100	1800

BWS-350	350	250-350	35	2.3	2400	2100	1900
BWS-500	500	350-500	50	2.4	2400	2100	2000
BWS-850	850	500-850	74	3.0	3100	2400	2300
BWS-1150	1150	850-1150	98	3.3	3500	2500	2300

BWS-1500	1500	1150-1500	123	4.1	4500	3000	2400

BWS-1700	1700	1500-1700	146	5.9	5000	3100	2300

BWS-2300	2300	1700-2300	194	6.5	5500	3800	2300

BWS-3000	3000	2300-3000	243	8.2	6500	4500	2400

Automatic Backflush Filter as the first step of the system is specifically designed for ballast water screening, which has fine mesh elements aiming to remove the microbe and sediments with size larger than 50μm.

Filter adopts the up-to-date concept of auto backflush to efficiently fulfill filtering and screen-cleaning at the same time, backflush automatically starts based on differential pressure while filtration continues, with no other manual on-site operations needed.

Filter functions only in Ballasting process while it is bypassed in De-ballasting process and By-pass process.