X-ray fluorescence sulfur meter

Product model: JF180

Instrument introduction

X-fluorescence sulfur meter is a new type of quantitative analysis instrument with microcomputer. The instrument is based on the X-fluorescence energy dispersion principle, the use of environmentally friendly X-ray tube excitation technology, the use of nuclear electronics and microcomputer together to form an advanced physical measurement method of analysis instruments; Detection without any chemical reagents, than the chemical analysis method is accurate, fast, the fastest 60 seconds to detect the sulfur content in liquid, solid powder samples.

Main Usage

1. Measurement of total sulfur mass percentage content in liquid samples such as crude oil, heavy oil, diesel,  

    kerosene, gasoline, naphtha, etc;

2. Measurement of sulfur content in solid powder samples, such as anode charcoal briquettes,

petroleum coke, modified bitumen and other carbonaceous materials;

3. Measurement of total sulfur or sulfide content in lubricants, petroleum additives;  

4. Measure the total sulfur or sulfide content in other liquids and solids.

Technical Parameter

1.Sulfur measurement range: 7ppm or more.    

2. Sample volume: 2~3ml;

3. Measurement time: 60, 120, 240 seconds, arbitrary setting;

4. Precision: Repeatability : <0.02894 (X+0.1691);

Reproducibility : <0.1215 (X+0.05555);

5. Power source: AC220V, 50Hz

6. Size: 468*358*158mm

7. Weight <12kg   

Main Feature

1. Automatic selection of the working curve, no need to manually select the curve of the

corresponding range according to the size of the sulfur content.

2. Automatically stabilize the spectrum and peak or determine the peak position through the  

instrument screen film, no longer need the user to open the outer cover to manually adjust the detector high voltage.

3. the instrument AC 220v / DC 12v two power supply mode, convenient for customers to use in the  

field.

4. The kernel of the instrument is like a computer, which can be extended according to the special

needs of different users, and can be upgraded remotely through the usb port of the instrument.

5. Unique mechanical structure design, into and out of the sample feeding operation almost silent.

6. Single sample automatic measurement, the number of measurements: 2, 3, 5, 10, 50 times  

arbitrarily set, the average value and standard deviation are given at the end of the measurement;

7. Calibration curve number: the instrument can store 9 calibration curves, 5 for the monomial linear,

4 for the binomial parabola;