HAWKER 48V 11PZB825 MOTIVE POWER BATTERY

HAWKER Hawk Forklift Battery PzB

HAWKER | The traction forklift battery produced by Hawke Power Supply Co., Ltd. is currently advanced in technology and process, and is also a widely used product in the industry. Many famous brand manufacturers such as forklift trucks, locomotive tractors, electric cleaning vehicles, and electric tour buses use HAWKERPZS traction batteries. Comply with DIN standards, mainly supporting European standard forklift trucks such as LINDE, HANGCHA, JUNGHEINRICH, HYSTER, BT, STILL, etc. Comply with JIS/BS standards, mainly supporting JIS/BS standard forklift trucks such as NICHIYU, TOYOTA, TCM, KOMATSU, SHINKO, and NISSAN.

Monomer structure

HAWKER traction batteries use mature tubular positive electrode plate technology. The positive electrode plate adopts a die-casting grid, and the active material is stored in a polyester material discharge pipe; The negative electrode plate uses a reinforced plate type electrode plate. Between the positive and negative electrode plates are multiple micropores with a convex membrane on one side. The single battery shell is made of polypropylene material with high impact resistance and high temperature resistance, and the shell cover adopts a heat sealing process to prevent leakage of electrolyte.

Pole terminal

Each positive and negative electrode terminal is cast from lead alloy and copper core terminals with internal threads. The coordination of the pole and the compressed sealing rubber ring can effectively prevent leakage of the electrolyte.

Single battery connection strip

The battery cells are connected by fully insulated halogen-free flexible connection strips. The method of fixing the connecting strip with bolts can make it easy and fast to take out the monomer from the battery pack for maintenance or replacement.

Safety valve

Each battery cell is equipped with a safety valve to allow the gas generated during charging to escape. The operation of adding purified water and measuring the specific gravity of the electrolyte can be performed through the safety valve. The safety valve also has a baffle for the battery to prevent electrolyte surge.

Battery cover

The battery cover has a design that allows the installation of an electrolyte stirring system or temperature sensor after punching.

Hawker Aquamatic Centralized Automatic Water Filling System

The Hawker Aquamatic centralized automatic water adding system can add water to all battery cells in the battery pack from the central point of the battery system. The system's water filling safety valve, as shown in the previous figure, can automatically maintain the optimal liquid level of the battery cell, while also allowing the gas generated during charging to escape and the operation of measuring the specific gravity of the electrolyte.

Electrolyte agitation system

The Hawker electrolyte circulating agitation system uses the air lift principle and utilizes a pipeline system installed on the battery to work. The diaphragm pump blows a low speed airflow into the battery, thereby circulating the airflow through the battery housing. This system can effectively prevent electrolyte delamination and ensure optimal charging.

advantage

● Higher capacity with the same overall dimensions

● Higher discharge efficiency

● Longer operation time and higher reliability

● Effectively integrates DIN and BS standards from European standards in terms of capacity and size

HAWKER traction battery with charged electrolyte stirring system

● Avoid stratification of electrolyte and temperature during partial or full charging

● Optimize the acceptance process of charging the positive and negative electrode plates of the battery, so that the bearing capacity of the positive and negative electrode plates is consistent

● Compared to traditional charging methods, it reduces charging time by 30% and energy consumption by 20%

● Avoid stratification of electrolyte and temperature during partial or full charging

● Optimize the acceptance process of charging the positive and negative electrode plates of the battery, so that the bearing capacity of the positive and negative electrode plates is consistent

● Compared to traditional charging methods, it reduces charging time by 30% and energy consumption by 20%

Electrolyte layering Electrolyte circulation

HAWKER HOKE ®  The size of traction type battery PzB type (with bolt solid connection bar) meets the requirements of IEC 254-2 'E' series standards.

Battery model

Nominal/rated capacity

(5 hours)

Maximum cell size (mm)

Weight of charged electrolyte

（+/-5% kg)

length

width

height

2 PzB 150

one hundred and fifty

forty-five

one hundred and fifty-seven point five

five hundred and forty-one

ten point nine

3 PzB 225

two hundred and twenty-five

sixty-one

one hundred and fifty-seven point five

five hundred and forty-one

fourteen point nine

4 PzB 300

three hundred

seventy-seven

one hundred and fifty-seven point five

five hundred and forty-one

nineteen

4 PzB 300A

three hundred

sixty-nine point eight five

one hundred and fifty-seven point one five

five hundred and nineteen

seventeen point three

5 PzB 375

three hundred and seventy-five

ninety-three

one hundred and fifty-seven point five

five hundred and forty-one

twenty-three point one

6 PzB 450

four hundred and fifty

one hundred and nine

one hundred and fifty-seven point five

five hundred and forty-one

twenty-seven point three

7 PzB 525

five hundred and twenty-five

one hundred and twenty-five

one hundred and fifty-seven point five

five hundred and forty-one

thirty-one point four

8 PzB 600

six hundred

one hundred and forty-one

one hundred and fifty-seven point five

five hundred and forty-one

thirty-five point six

9 PzB 675

six hundred and seventy-five

one hundred and fifty-seven

one hundred and fifty-seven point five

five hundred and forty-one

thirty-nine point five

10 PzB 750

seven hundred and fifty

one hundred and seventy-three

one hundred and fifty-seven point five

five hundred and forty-one

forty-three point seven

11 PzB 825

eight hundred and twenty-five

one hundred and eighty-nine

one hundred and fifty-seven point five

five hundred and forty-one

forty-seven point eight

12 PzB 900

nine hundred

two hundred and five

one hundred and fifty-seven point five

five hundred and forty-one

fifty-one

2 PzB 170

one hundred and seventy

forty-five

one hundred and fifty-seven point five

five hundred and ninety-seven

twelve point three

3 PzB 255

two hundred and fifty-five

sixty-one

one hundred and fifty-seven point five

five hundred and ninety-seven

seventeen

4 PzB 340

three hundred and forty

seventy-seven

one hundred and fifty-seven point five

five hundred and ninety-seven

twenty-one point six

5 PzB 425

four hundred and twenty-five

ninety-three

one hundred and fifty-seven point five

five hundred and ninety-seven

twenty-six point three

6 PzB 510

five hundred and ten

one hundred and nine

one hundred and fifty-seven point five

five hundred and ninety-seven

thirty point nine

7 PzB 595

five hundred and ninety-five

one hundred and twenty-five

one hundred and fifty-seven point five

five hundred and ninety-seven

thirty-five point six

8 PzB 680

six hundred and eighty

one hundred and forty-one

one hundred and fifty-seven point five

five hundred and ninety-seven

forty point four

9 PzB 765

seven hundred and sixty-five

one hundred and fifty-seven

one hundred and fifty-seven point five

five hundred and ninety-seven

forty-four point eight

10 PzB 850

eight hundred and fifty

one hundred and seventy-three

one hundred and fifty-seven point five

five hundred and ninety-seven

forty-nine point seven

11 PzB 935

nine hundred and thirty-five

one hundred and eighty-nine

one hundred and fifty-seven point five

five hundred and ninety-seven

fifty-four point four

HAWKER 48V 11PZB825 MOTIVE POWER BATTERY