What are the advantages of transparent molds? (Plastic transparent chair mould)

First of all, in our daily life, how should we make transparent molds? Transparent molds, such as transparent plastic products, are made of colorless glass as the main raw material. This mold has the following characteristics: there is no surface treatment method, and transparent plastic products can be obtained only by coating plastic film on the mold. If you want to produce transparent molds, you need to understand why transparent molds do this? What is the reason? Transparent molds usually have the following characteristics: ① fundamentally eliminate the irritation of materials to eyes and skin; ② No adhesive is required during manufacturing; ③ No harmful substances will be produced; ④ It will not pollute the environment; ⑤ Low cost; ⑥ Easy to use; ⑦ High temperature resistance and high density; ⑧ No aging. This mold is an essential step in the production process. But it takes longer than plastic molding. This is one of the reasons why it is widely used.

1. The operation is simple, just put glass or transparent plastic into the mold, then stick the film and wait for the mold to cure.

Then, apply plastic film on the mold, and then cover the mold, so that the film can be firmly combined with the mold. It only takes a few minutes to get the product. High production efficiency. Simple and convenient operation. This is because plastic molding is carried out at a higher temperature. When the product temperature reaches a certain value, the film must be pasted on the mold again and cured.

2. No adhesive is needed, just apply a film on the mold, so it will not cause irritation to eyes and skin.

The film will not produce any harmful substances and will not pollute the environment, and the plastic products have a longer service life. When we deal with transparent molds, we must first determine whether the mold material is correct. If not, we will cut the material and finally replace it. Compared with traditional molding methods, transparent molding process is more efficient. Its production efficiency is as high as 20-30%. Therefore, when you use transparent molds, it can help you save a lot of costs.

3. Transparent plastics have higher hardness and can be used for longer time and longer time.

Transparent plastics have many advantages. First, it makes it easier to use and can be used for a long time. Secondly, it can protect vision. Because it is transparent, the eyes have no irritation to it. This is why people like transparent plastic. The existence of fillers in transparent molds will affect the surface roughness of products. Therefore, the filling method of transparent plastic is very strict. However, its hardness is high, which can protect vision and use it well.

4. Compared with traditional plastic molding, there is no coating in the glass mold, so it is difficult to see the environmental components in the product during the production process.

This is to avoid pollution and reduce environmental costs. Many pollutants will be produced during the production of plastic moulds. Therefore, it has protected the environment to a certain extent. Glass mold is a recyclable green material made from non-renewable energy. And it will not produce toxic substances when it is made by low-cost method. The production process will not cause environmental pollution. Therefore, the glass mold has a strong environmental protection effect. And plastic mold pollution is also an inevitable problem.

If you are looking for plastic transparent chair mould, pls contact odinmould, we are Injection Molding Manufacturer. Odin mould has various types of plastic transparent chair mould for sale.