Warm Tips: 

We can supply most of the manufacturers of filter accessories, complete model, the goods quickly, quality assurance.

 

Limited space, not one by one show, if demand, please contact, thank you!

 

Air filtration, liquid filtration, gas filtration, hydraulic oil filtration, petroleum filtration, 
dust filtration, coalescers, separators - we can all produce!
No matter which brand - we can produce!
No matter which model - we can produce!
You have needs - please contact us.

Fine Filters are offline oil filtration systems with integrated circulating pump for off-line installation. The filters are recognized around the world as highly efficient purification systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more. 

Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish). The Depth Filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.

Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil. The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.

filter inserts

 

Increase lifetime of both oil and system components 

With Oil Filter Inserts you get clean & dry oil which is the key to reliable system operation. C.C.JENSEN is the global leader in offline oil filtration with decades of experience on the worldwide markets. With the unique combination of our Offline Oil Filtration systems and the  Filter Inserts, you get the best combination, with the highest Contamination Holding Capacity on the market.

Filter inserts with Contamination Capacities

Filter Inserts have outstanding contamination capabilities of up to 4 kg and even more per Filter Insert depending on application. Build-up as a modular design, allows them to fit any application and system sizes. All  Filter Inserts have oil filtration degrees of 3 µm (micron) and below. This means min. 98.7% of all solid particles larger than 3 µm are retained in one pass. The Filter Inserts are removing both particles, water, varnish and acidity.

Depth filtration vs. Pleated Filters

 Filter Inserts are depth filters and due to the unique construction of the bonded discs and the special cellulose-based material, it creates a huge filtration area. This large filter mass makes this unmatched high Contamination Capacity possible. Even cellulose filters are not alike and  has been refining the moulded discs technology for decades. 

Dirt Holding Capacity creates value

Offering the highest Dirt Holding Capacities (DHC) on the market is very favourable, as the dirt holding capacity per Filter Insert based on cost per Filter Insert. This results in a cost per kg removed contamination that is 10 times lower than alternative solutions on the market, resulting in reduced cost of ownership.

Oil Types

The Filter inserts are used for maintenance of almost all oil types; 

Hydraulic oils, gear oils, lube oils, mineral/synthetic oils, engine lube oils for 2&4-stroke engines, diesel fuel (MGO, MDO, LSFO), gas oils, quench oils, heat transfer oils, honing oils, rolling oils, transformer oils, gas engine oils, phosphate esters (HFD), tap changer oils, insulating oils, refrigerator compressor lube oils, bearing lube oils, turbine oils, EAL, glycol-based fluids (PAG), water glycol-based fluids (PEG), water based fire resistant fluids (HFA, HFB), water based machine tooling fluids etc. 

Sustainable solution

 Filter Inserts are produced from 100% natural cellulose fibres. Natural organic sustainable fibres are nature’s best with properties superior to those of synthetic fibres. Natural cellulose fibres come in many sizes and shapes. To make the best Filter Inserts, we mix and treat raw fibres before making our unique composition and design - 100% natural cellulose fibres - no metal, no plastic, no chemicals

Specially designed for filtration of small volume hydraulic and lubricating oils

The A Filter Inserts are designed with fine filtration, high dirt holding capacity and low operation cost in mind, resulting in lowest cost for removing one kilo of contamination from oil. The A Filter Inserts remove all four contamination types in one and the same process: particles, water, varnish, and acidity. 

Due to the relatively high pressure loss compared to other Filter Inserts, the A Filter Insert is primarily used for low viscosity or warm oils. 

For decades, the A Filter Insert has proven its value in real-life applications in thousands of oil systems. The A Filter Insert is used in Fine Filters HDU series.

Used for maintenance of below applications: 

Small hydraulic systems

Small engines e.g. generator sets

Small lubricating oil systems

Contamination Capacities

Based on field experience, we have observed that the total Dirt Holding Capacity (DHC) is dependent on shape and density of particles and other variables within an oil system. 

When saturated, the total weight of accumulated contamination depends on the application, the combination of contaminants, as well as the density of the captured contamination. 

Your benefits with 

 Filter Inserts have the highest dirt holding capacity on the market due to special cellulose-based material. Furthermore, the unique construction of the bonded discs, creates a large filtration area resulting in reduced costs of ownership. The Filter Inserts are a modular design, which allows them to fit any applications and requirements.

The Filter Insert features:

Depth media of moulded cellulose

Highest Contamination Capacities (DHC)

100% natural cellulose fibres from sustainable resources;

no plastic, no metal, no chemical

 

Removal of contaminants, 4-in-1:

Particles:

Lifetime of both oil and component are increased considerably.

Oil degradation products:

Avoid sticking valves, lacquering, and varnish on metal surfaces.

Water:

Reduce the risk of micro-pitting, bacterial growth, sludge etc.

Acidity/TAN:

Reduce oil ageing and wear on equipment.

 

OEM requirements

Experience and application knowledge of  ensure that solutions can meet specifications from OEMs on oil cleanliness.

How to ensure Clean & Dry oil

Remember to change Filter Inserts according to pressure gauge or at least once a year in order to ensure clean & dry oil! - Click here to learn how to replace a Filter Insert.

Our filtration equipment is used in a wide range of industries:

Contact us

john Fimler Filter WeChat: +8613632692595 whatsapp:+8613632692595 QQ:4798742