Warm Tips: 

We can supply most of the manufacturers of filter accessories, complete model, the goods quickly, quality assurance.

Limited space, not one by one show, if demand, please contact, thank you!

Air filtration, liquid filtration, gas filtration, hydraulic oil filtration, petroleum filtration, 
dust filtration, coalescers, separators - we can all produce!
No matter which brand - we can produce!
No matter which model - we can produce!
You have needs - please contact us.

Fine Filters are offline oil filtration systems with integrated circulating pump for off-line installation. The filters are recognized around the world as highly efficient purification systems for applications involving hydraulic oil, lubrication oil, gear oil, quenching oil, phosphate esters and more.

Fine Filters are ideal for controlling oil contamination levels for particles, water and degradation products (oxidation resin/sludge, varnish). The Depth Filters have a filtration degree of 3 microns absolute and a very large dirt-holding capacity.

Fine Filters deliver measurable customer benefits: lower operation and maintenance costs, increased productivity, and maximum lifetime for system components, in-line filters and oil. The modular filter units are built and sized to specific customer requirements - whether the oil volume is 2 litres or 200,000 litres.

Clean lube oil with filter inserts

Your solution to the alternative method of maintaining lube oil on 2- and 4-stroke engines that enables you to achieve significant cost savings with simple uncomplicated technology while lowering the environmental impact by reducing energy and oil consumption. OEM demands for cleanliness are fulfilled at the same time as offering an exceptional operational economy to ship-owners. Protect hydraulic equipment by having clean oil with Filter Inserts. 

LO4R filter insert

Specially designed for lube oil on 4-stroke diesel engines operating on residual fuels

The LO4R Filter Insert is specially designed for cleaning crankcase lubricants for medium speed 4-stroke diesel engines operating on residual fuel.

The LO4R Filter Insert is ideal for filtration of SAE30 and SAE40 lubricating oil - replacing the traditional centrifugal separator.

Compatible for engines operating on:

Low Sulphur Fuel Oil (LSFO)

High Sulphur Fuel Oil (HSFO)

Contamination Capacities

The LO4R Filter Insert has well balanced dirt holding capacity and high filtration efficiency for optimum control of the contamination level, removing:

Combustion contaminants

Wear particles

Oil degradation products (Varnish)

Asphaltenes

Water

The LO4R is designed especially for engine lube oil and gives superior results; fine filtration, increased oil life and long filter insert life. Better filtration than a centrifugal separator, and much lower oil and operation cost. Comprehensive field experience has proven a very long filter insert service life as well as extended lube oil services, keeping the level of insolubles below engine maker recommendations.

This specific Filter LO4R Insert is applicable ONLY with below Oil Filters:

 Lube Oil Filter for 4-stroke 

medium & high speed trunk diesel engines 

 Lube Oil Purifier 27 

for 2- & 4-stroke diesel engines

 Lube Oil Purifier 427 

for 2- & 4-stroke diesel engines

Your benefits with 

Filter Inserts have the highest dirt holding capacity on the market due to special cellulose-based material. Furthermore, the unique construction of the bonded discs, creates a large filtration area resulting in reduced costs of ownership. The Filter Inserts are a modular design, which allows them to fit any applications and requirements.

The Filter Insert features:

Depth media of moulded cellulose

Highest Contamination Capacities (DHC)

100% natural cellulose fibres from sustainable resources;

no plastic, no metal, no chemical

Removal of contaminants, 4-in-1:

Particles:

Lifetime of both oil and component are increased considerably.

Oil degradation products:

Avoid sticking valves, lacquering, and varnish on metal surfaces.

Water:

Reduce the risk of micro-pitting, bacterial growth, sludge etc.

Acidity/TAN:

Reduce oil ageing and wear on equipment.

OEM requirements

Experience and application knowledge of ensure that solutions can meet specifications from OEMs on oil cleanliness.

How to ensure Clean & Dry oil

Remember to change Filter Inserts according to pressure gauge or at least once a year in order to ensure clean & dry oil! - Click here to learn how to replace a Filter Insert.

We offer an extensive cross for the following brand

Our filtration equipment is used in a wide range of industries:

Advanced production process: