Product Details

Model	HD-542MS
X/Y/Z measurement stroke	500×400×200mm
Z axis stroke	Effective space: 200mm, working distance: 45mm
XY axis platform	X/Y mobile platform：Grade 00 cyan marble; Z axis column: cyan marble
Machine base	Grade 00 cyan marble
Size of glass countertop	580×480mm
Size of marble countertop	660×560mm
Bearing capacity of glass countertop	30kg
Transmission type	X/Y/Z axis: Hiwin P-grade linear guides and C5-grade ground ball screw
Optical scale	0.0005mm
X/Y linear measurement accuracy (μm)	≤3+L/200
Repetition accuracy (μm)	≤3
Motor	HCFA high performance double closed loop CNC servo system
	X axis uses a HCFA 400W servo motor with double closed loop control system
	Y axis uses a HCFA 750W servo motor with double closed loop control system
	Z axis uses a HCFA 200W servo motor with braking function
Camera	4K Ultra HD Digital Camera
Observation method	Brightfield, oblique illumination, polarized light, DIC, transmitted light
Optical system	Infinity Chromatic Aberration Optical System Metallurgical objective lens 5X/10X/20X/50X/100X optional Image magnification 200X-2000X
Eyepieces	PL10X/22 Plan High Eyepoint Eyepieces
Objectives	LMPL infinity long working distance metallographic objective
Viewing Tube	30° hinged trinocular, binocular: trinocular = 100:0 or 50:50
Converter	5-Hole Tilt Converter with DIC Slot
The body of the metallographic system	Coaxial coarse and fine adjustment, coarse adjustment stroke 33mm, fine adjustment accuracy 0.001mm, With coarse adjustment mechanism upper limit and elastic adjustment device, Built-in 90-240V wide voltage transformer, dual power output.
Reflective lighting systems	With variable market diaphragm and aperture diaphragm and color filter slot and polarizer slot, With oblique lighting switch lever, single 5W high-power white LED and continuously adjustable brightness
Projection lighting systems	With variable market diaphragm, aperture diaphragm, color filter slot and polarizer slot, With oblique lighting switch lever, single 5W high-power white LED and continuously adjustable brightness.
*Overall dimension（LWH）*	1300×830×1800mm
Weight	400kg
Power supply	AC220V/50HZ　AC110V/60HZ
Computer	Intel i5+8g+512g
Monitor	Philips 27 inches
Warranty	1 year warranty for the whole machine
Switching power supply	Mingwei MW 12V/24V

Working Environment of Instrument

1. Temperature and humidity

Temperature: 20－25℃, optimal temperature: 22℃; relative humidity: 50％－60％, optimal relative humidity: 55％; Maximum temperature change rate in the machine room: 10℃/h; It is recommended to use a humidifier in dry area, and use a dehumidifier in humid area.

2. Heat calculation in the workshop

·Keep the machine system in the workshop operating in the optimum temperature and humidity, and the total indoor heat dissipation must be calculated, including the total heat dissipation of indoor equipment and instruments (lights and general lighting can be ignored)

·Heat dissipation of human body: 600BTY/h/person

·Heat dissipation of workshop: 5/m²

·Instrument placement space (L*W*H): 3M ╳ 2M ╳ 2.5M

3. Dust content of air

The machine room shall be kept clean, and the impurities greater than 0.5MLXPOV in the air shall not exceed 45000 per cubic foot. If there is too much dust in the air, it is easy to cause resource read and write errors and damage to the disk or read-write heads in the disk drive.

4. Vibration degree of machine room

The vibration degree of machine room shall not exceed 0.5T. Machines that vibrate in the machine room shall not be placed together, because the vibration will loosen the mechanical parts, joints and contact parts of the host panel, resulting in abnormal operation of the machine.

Ⅲ. Power Supply AC220V/50HZ　AC110V/60HZ