Features:
L-510
Packing specification: 50ml
Color: pink
Viscosity: 40000/140000 m pa.s
Maximum filling gap: <0.25mm
Temperature range: -55~+200 degrees
Curing speed: 25 minutes/72 hours
Relative density: 1.1
Typical use: 510 is a medium-strength, anaerobic sealant with excellent heat resistance. This product has excellent fluid resistance, high temperature resistance, and rigid adhesive layer. It is used for flange parts with tightly matched rigid structures, especially suitable For environments with high temperature and chemical resistance requirements.
L-515
Product specifications: 50ML
Appearance color: dark purple
Viscosity: 275000mPa.s
Gap filling: <0.25mm
Curing speed: medium curing speed
Temperature resistance: -55 ~ + 150 degrees
Application: Usually used as in-situ gaskets for pumps, thermostats, compressors, gearboxes and safety locks, it is more suitable for rigid metal flanges, medium curing speed, thixotropy.
L-518
Packing specification: 50ml
Color: fluorescent red
Viscosity: 500000/1000000 m pa.s
Maximum filling gap: <0.25mm
Temperature range: -50~+150 degrees
Curing speed: 25 minutes/24 hours
Relative density: 1.13
Typical use: 518 is a general-purpose, flexible, excellent fluid resistance, non-corrosive, medium-strength thixotropic anaerobic sealant with fast curing properties. It can form a flexible, solvent-resistant sealing layer. Will tear or age, can be applied to flexible metal assembly including aluminum surface, easy to disassemble and clean. It is especially suitable for on-site forming gasket glue on rigid flange surfaces of gearboxes and engine shells.
L-574
Net capacity: 50ml
Product color: orange
Product type: High oil resistance, excellent water resistance and glycol resistance
Viscosity: 20000-40000 MPD. S
Temperature range :-55/150° C
Curing speed :12 hours 24 hours (with 7649 accelerator: 30 minutes)
Recommended accelerator :7649