We have all types of Loctite glues used in maintenance, repair and manufacturing. Welcome to wholesale!
Wholesale Hotline:
Tel: 13559339038
Email: sk19920520@163.com
WA Business: 13559339038
You can contact our account manager through the above methods. She will solve the after-sales and cooperation problems for you.
Product features and introduction:
01. (Removable) Normal tools can be removed without damaging the thread
02. Non-toxic, harmless, healthy and environmentally friendly glue, high temperature resistance, low temperature resistance, high strength and good sealing effect
03. The shelf life of Kaifeng is about 1 year and needs to be placed in a cool area.
04, 567# (high temperature resistance) general purpose
565# (drinking water system)
577# (metal high strength)
572# (slow curing for easy debugging)
586# (oil resistance and chemical resistance)
569# (anti-shock and anti-vibration)
545# (hydraulic device is easy to disassemble)
542# (metal thread for pneumatic equipment)
554# (solvent resistance protection of refrigeration system)
05. (50m1 can be connected to about 10-15 4 branch heads) (250m1 can be connected to about 70-80 4 branch heads)
06. After the anaerobic glue is installed, the excess glue that flows out through the thread extrusion will not dry, just wipe it off, and the anaerobic glue will only dry and cure the glue inside the thread.
07. The installation is cured and sealed well (the glue can be used for 70-80 years), and the glue has anti-aging effect
08. Clean the thread first, grab the bottom of the glue and throw the glue to the glue outlet for easy operation. Apply 2 turns of glue on the thread, and twist it back and forth twice during installation, so that the glue can fully contact the thread and obtain a better seal. After installation and use, you need to wait for 12-24 hours for curing and sealing, and you can start to test the sealing effect.
09. Special construction environment requires rapid curing, which can be matched with a bottle of accelerator SF-7649
(The curing time is completed within half an hour) First, spray the accelerator on the internal and external threads, apply glue, and install the threads to wait for curing.