IC698CHS017B 17 Slot Installation frame

The IC698CHS017 is a 17-slot, front and rear mounted rack capable of supporting Series 90-70, VME, and RX7i modules. The module connectors on the rack backplane are spaced 0.8 inches (20.3 mm) apart and are compatible with both single width and double width modules. Rack slot zero holds the unit’s power supply, and rack slot one holds the unit’s CPU. All other slots are available for any mixture of modules.

 The IC698CHS017 is considered an “open equipment” rack; therefore, it must be installed in at least an IP54 protection encasement. This rack is 11.15 inches tall (283 mm), 19 inches wide (483 mm), and 7.5 inches deep (190 mm). Nine inches (23 cm) of space is required to install a fan between racks. Note: A cooling fan is required if certain modules are installed in the rack, and each fan is designed for a different power source.

 Jumpers and DIP switches are not needed for addressing modules; instead, the rack supports slot sensing for I/O modules. Input/output module point referencing is accomplished via CIMPLICITY Machine Edition Logic Developer-PLC software. Interrupt acknowledge signals as well as bus grant signals are automatically connected together in a daisy chain configuration. RX7i AC power supplies are supported by the IC698CHS017 with the ability to sustain even higher currents. J2 connectors on the rack backplane support 64 bits per cycle VME transfer speeds.

Xiamen Xiongba Electronic Commerce Co. LTD

FROM：Mr. Wei

E-Mail：2322181769@qq.com

TEL/WeChat:15396237607

PC control module

PC control module, is based on PC as a basic development of a control terminal. PC control module is a programmable controller, is used for communication between PC and PC station terminal, mainly used to achieve control data communication function. PC control module has powerful functions, good compatibility, high security, cheap price, simple maintenance, support industrial environment and other characteristics. According to customer requirements for secondary development and production, with high cost performance. PC control module through serial communication technology and analog/digital communication technology and PLC, MCU and other control equipment to achieve communication, can be used in PLC, MCU and other control equipment.

1, connection control network, can support single point and multi-point connection, improve the speed of the system

At present, many PLC manufacturers in China have introduced PC control module which supports multi-point network control. Such as Taiwan Asus, Taiwan Xinli, Toshiba semiconductor, etc.; In addition, Huawei, Hikvision, Jingdong and other enterprises have also launched PC control modules supporting multi-point networking control, such as Siemens PowerServer, etc. These enterprises are very confident in the quality and performance of PC control modules. For PLC products with high production environment requirements,PCI-E (Simulator Internet) technology has become a widely adopted development trend. At present, many PLC manufacturers are launching their own platform PCI-E products. Due to the high quality and comprehensive functions of PCI-E products, it is not necessary to configure the hardware circuit or software function of PC in the production process. As long as the customer needs, according to different occasions, application requirements for secondary development and production.

2, interoperable with the user computer

The work of PLC is realized by PC computer. Therefore, the computer should be kept at an appropriate safe distance from the PC and the communication channel between the two must be kept in good operation. PLC can be installed on the rack of a PC computer. The staff of the user computer should operate the PLC through the PC computer. The PLC should be run on the computer, or placed on a special rack (such as a PLC server installed on the rack). The server must communicate with the user computer.

If you need to inquire or purchase ,please send the product models to my email or call me directly .

Contact detail:Mobile/ WeChat/ WhatsApp:+86-15396237607

E-mail:2322181769@qq.com

QQ: 2322181769

3. Real-time display of control information

If there is communication between PLC or PLC and MCU, PLC can access information through FPGA or DSP to achieve data acquisition through the serial communication protocol provided by FPGA or DSP. This technology realizes the real-time display of the collected data, and realizes the information sharing between PLC and PC. When system failure or error occurs, PLC can access the industrial data of user equipment through FPGA or DSP, and the user can access the industrial data of user equipment through FPGA. In addition, the data access software can be used to access the data of the user device during program execution through FPGA and DSP. After the program is executed, it can also access the industrial data of the user's device when the data needs to be reexamined. At present, such data access mode can be realized between PC and PLC. PC provides users with a more flexible and free access environment.

4, the control center can directly control other application software, expand the data function, improve the speed of data processing

PC control module is an embedded system control center, which consists of CPU, memory, display and so on. The automation control system is realized by PC, MCU and peripheral devices. Used to control all computers in the industrial field, including monitoring software, programs, industrial computers, etc. PC control module, not only can be in the industrial site for operation monitoring, but also can be in the industrial site for remote monitoring. PC control module, but also has the remote operation function, can be in the remote site of each equipment for remote data view and data maintenance!