Rebar connection sleeves have long been used for every engineering construction spare part. Except for rebar lap joints such as rebar sleeves, other rebar lap methods are mostly invisible on construction sites. There is a kind of steel sleeve in the steel sleeve called the reducing steel sleeve. The characteristic of this type of building steel bar is that the diameter is the same length on the top of the outer shape, but if you look at the inner diameter, the two sides of the sleeve specification method are thick and thin. That's why this is called a reducing bar sleeve.

The demand for this type of steel sleeve is not very large, and it is not suitable to purchase in large quantities, so as to avoid unnecessary consumption. Reinforcing steel sleeves can also be used in the situation of the floor plan. If there are areas where two building steel bars of different thicknesses must be connected, the reducing steel sleeves can be used. In addition to the reducing steel sleeve, there are also many other types of sleeve specifications, which are very effective in the situation of different steel laps.

This type of connection method is more stable than the previous methods of electric welding or lap jointing of steel bars, and the method of connecting steel bar sleeves is not affected by the external temperature factor, even in areas where fire cannot be seen. , Because the steel connecting sleeve does not need to use fire in the case of connection.

Specifications: can be customized

18/16 22/16 32/25

20/18 25/22

20/16 28/25

22/20 28/22

22/18 32/28