GSK 25i series Guangzhou CNC system

8 feed axes plus 2 servo spindles

4-axis linkage、5-axis linkage

Up to 8 axes

Up to 4 axes

Pulse encoder (absolute type), grating ruler (absolute type)

Maximum feed speed 200m / min

Acceleration, deceleration and acceleration control of straight line and S-curve before interpolation

G05 high speed small segment forward-looking, trajectory smoothing, forward-looking and pre reading up to 1000 segments

Minimum instruction unit

Minimum instruction unit IS-B

0.001mm

0.0001inch

0.001°

Minimum instruction unit IS-C

0.0001mm

0.00001inch

0.0001°

 Minimum detection unit

Minimum instruction unit IS-B

0.001mm

0.0001inch

0.001°

Minimum instruction unit IS-C

0.0001mm

0.00001inch

0.0001°

RTCP function

Tool center point control G43 four

Inclined surface machining

Five axis positioning (3 + 2) machining g68 two

Five axis manual feed

Manual feed of tool axis, right angle direction of tool axis and rotation direction of tool center point

ISO instruction standard, program name: 0 + 4 digits, segment number n + 5 digits, G + 3 digits, coordinate value | P ± 4 digits after the first 6 decimal places, S + 5 digits, t + 3 digits, M + 3 digits, F + 4 digits after the first 6 decimal places

Positioning, linear interpolation, arc interpolation, spiral interpolation, cylindrical interpolation, polar coordinates, spline interpolation

48 groups of basic coordinate system G52 ~ G59 and additional extended coordinate system (g54.1)

C tool compensation function, 400 groups of tool compensation

There are more than 100 g instructions in total, including 12 common fixed cycles, 19 special fixed cycles and compound cycles, face milling, coordinate system rotation, scaling, mirroring, automatic tool length measurement, tool center point control, inclined surface machining instructions. The subroutine call level is 4, and class B user macro program

The program storage capacity is more than 4G, and the number of program storage is 400

G27 return to reference point inspection; G28 return to reference point; 

G31 skip function for tool and workpiece measurement

Programmable travel limit (G22, G23), programmable data input (G10)

Automatic, MD, edit, manual, hand pulse, zero return, DNC

Single section, skip section, machine tool locking, auxiliary function locking, selective stop, idle operation, restart, emergency stop, overtravel release, cycle start, feed hold, manual continuous feed, single step feed, rapid feed, rigid tapping fallback, spindle magnification, feed magnification, rapid magnification

Tool length compensation measurement input, workpiece offset measurement input, parameter setting help, servo parameter setting

New, edit, delete, rename, search, copy, copy, paste, read in, transfer out, background editing, dynamic graphic simulation

Alarm information explanation, operation description, parameter description, macro instruction description, G code instruction description, PLC address description, calculator

15 inch, 10.4 inch and 8.4 inch LCD displays, Chinese and English display, status display, dynamic graphics, clock, processing time, running time, number of processed pieces, modal information, actual speed, hardware and software version, ladder diagram, alarm information, diagnostic information, alarm history and operation history display

M3 digit code, multi M code instruction, M code calling macro program and subroutine.

T3 digit, tool life management

Digital spindle, analog spindle interface ± 10 analog voltage output, S5 digit spindle speed designation, multi spindle control spindle orientation, M-type and T-type shift, floating tapping, rigid tapping, spindle magnification and spindle speed fluctuation detection

Reverse gap compensation

Rapid feed and cutting feed are compensated separately

Pitch compensation

Interpolation one-way and two-way pitch error compensation

Rear Ethernet and front ∪ sb interface, through which data transmission, DNC and network functions can be realized Data input /output

Program, NC parameters, compensation value, offset value, macro variable value, PLC program and PLC parameters are input and output through data interface, and can be DNC through Ethernet and USB interface

Ethernet communication, network DNC, remote monitoring, remote diagnosis and remote maintenance

IOR-04T terminal type I/O          DI/DO:48/32

IOR-44T terminal type I/O                DI/DO:48/32      AO: 4-way,0~10V

I / O interface

IOR-21F  flat cable plug-in I/O DI/O:24/16 AO:2路,0~10V

IOR-44F flat cable plug-in analog I/O DI/DO:48/32 AO:4路,0~10V

Maximum extension points  DI/O:  1024 points/1024 points

GSK -link Ethernet bus interface

It is suitable for heidenham absolute grating ruler and angle encoder, endat2 2 protocol adaptation, incremental grating ruler, angle encoder, TTL square wave signal