Product Description
Guangzhou CNC GSK980TB3i CNC lathe System
Guangzhou CNC has lathe CNC system, drilling and milling machine CNC system、
CNC system of machining center、CNC systems in many fields such as grinding machine CNC system.
(Be careful：For detailed specifications, models and inquiries, contact customer service for negotiation)
Specification
Motion control function |
Control axis: X axis, Z axis, Y axis, c axis; C axis can be used as CS axis; Optional 4-axis 3-linkage |
Interpolation mode: positioning (G00), straight line (G01), arc (G02, G03) |
Position command range: metric: - 999999.99mm -999999.99mm、minimum command unit: 0.0001mm British: - 9999.9999nch-9999.9999inch、minimum command unit: 0.00001inch |
Feed rate: 0 ~ 200% 21 level real-time adjustment |
Maximum cutting feed rate: 15000 mm / min |
Fast magnification: F0, 25%, 50%, 100% four level real-time adjustment |
Maximum fast speed: 60000 mm / min |
Feed per revolution: 0.01mmr ~ 500mm (spindle encoder shall be installed) |
Acceleration and deceleration mode: front acceleration and deceleration (linear and S-type) and rear acceleration and deceleration (linear and exponential type) |
Electronic gear ratio: frequency doubling 1 ~ 65535, frequency division 1 ~ 65535 |
Hand pulse feed: three gears of 0.001, 0.01 and 0.1mm Single step feeding: four gears of 0.001, 0.01, 0.1 and 1mm |
Display interface |
Display: 8.4-inch digital screen |
Display of machining track and preview of programming track |
G function |
System a instruction format is adopted, with a total of 39 g codes, including fixed cycle code and complex cycle code |
Support level 5 subroutine call and user macro program call |
support Sentence type Program (macro a, macro b) |
T tool function |
Suitable tool rest: General Electric tool rest, Liuxin tool rest and DELTA servo tool rest |
Tool change mode: MD automatic absolute tool change or manual relative tool change, forward rotation tool selection and reverse locking |
Tool setting mode: fixed-point tool setting, trial cutting tool setting, return to mechanical zero point tool setting |
Tool position signal input mode: direct input |
Spindle function |
S2 digit (o gear control) / S5 digit (analog output) |
Spindle encoder: the number of encoder lines can be set (100 ~ 999999p / R) |
Transmission ratio between encoder and spindle: (1-255): (1-255) |
Spindle magnification: 50% ~ 120%, a total of eight levels of real-time repair and adjustment |
2 channels of 0 ∨ - 10 ∨ analog voltage output, Support dual spindle control |
-10v-10v analog voltage output parameters are optional |
M auxiliary function |
Specify with address m and 2 digits, and the M function can be customized |
Internal system m instruction (non redefinition): program end m2 and M30; program stop M00: select Stop M01, program call M98 ; subroutine end M99 |
Coolant start and stop, lubrication start and stop, MD automatic mode control chuck clamping / loosening, and control the advance and retreat of tailstock |
Thread function |
Common thread (following spindle) |
Single head / multi head metric and inch straight thread, taper thread and end face thread, equal pitch thread and variable pitch thread |
The length, angle and speed characteristics of thread tailing can be set by program and parameters |
Thread pitch: 0.001mm-500mm (metric system) 0.06 tooth inch - 25400 tooth inch (British system) |
Compensation function |
Pitch error compensation: the compensation interval and compensation origin can be set, and one-way screw compensation or two-way screw compensation can be selected |
Reverse clearance compensation: fixed frequency or speed up and down compensation can be set, and different reverse clearance compensation is supported for G0 and G1 |
Tool compensation: 99 groups of tool length compensation and tool tip radius compensation |
PLC function |
PLC processing speed: 1US / step; 8000 steps at most; 10 basic instructions and 35 functional instructions |
L / O unit input / output: 32 / 32, expandable |
1-4 PMC axes can be selected |
Program editing |
Subroutine: editable, supporting quintuple subroutine nesting |
Program capacity: 57mb, 400 programs |
Format: relative absolute mixed programming |
Support background editing and programming program track preview |
Operation function |
Mode selection: edit, automatic, MD |, zero return, manual, single step, manual pulse |
Operation control: single section, skip section, empty operation, auxiliary lock, program restart, hand pulse interruption, single step interruption and manual intervention |
Safety function |
Emergency stop |
Hardware travel limit |
Data backup and recovery |
communication |
RS232: bidirectional transmission of part programs, parameters and other files, supporting PLC programs |
USB: USB flash disk file operation, support PLC program, system software USB flash disk upgrade |
Network interface: two-way transmission of part programs, parameters and other files and connection with computer (PC) can monitor the system processing program, coordinate position, number of processing pieces, cutting time and other information |
Adapter parts |
Switching power supply: rs-pb2 (supplied together, installed and connected) |
Drive unit: GSK GR series tool holder controller: |
Tool holder controller GSK TB tool holder controller |
Product features
External connection diagram of network interface bus
● 8.4-inch digital screen display;
● adopt network port bus connection;
● front USB flash disk interface, rear RS232 serial port communication and network port communication interface;
It has 3 kinds of exterior structure: horizontal, vertical and split mask.
● 16 input signal interfaces are reserved at the rear of horizontal and vertical systems
● provide differential external handwheel interface.
Packing & Delivery
FAQ
Q: Do you support customized manufacturing?
A: Yes,we can customized manufacturing according to customer's requirment. We support to OEM your own company display interface and logo.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to
quantity.10-20 days if customized manufacturing.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample with sample price.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=1000USD, 70% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below
A: Yes,we can customized manufacturing according to customer's requirment. We support to OEM your own company display interface and logo.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to
quantity.10-20 days if customized manufacturing.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample with sample price.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=1000USD, 70% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below