Solar Water Heater Production Machinery, buy Electric Water Heater Production Line on China Suppliers Mobile

Product Details

Electric Water Heater Production Line

Please find the video at: /watch?v=708VMKiukoo

Product Description

Outer tank inward bending machine used to process the outer tank of electric water heater. This machine finish the inward bending of outer tank two ends.

Effieiency: nacking 5/6 pieces per minute.

Includ: two same machines. One necking/inward bending one end and the other necking the other end.

Process parameters
1	Applicable product	Electric water heater shell necking (including inward connecting method).
2	Power	415V,3L/N/PE,50 Hz.
3	Driving power	All feeding mechanisms adopt servo motors
4	Ambient Condition	-5°C~+45°C, workpiece is with normal temperature
5	Applicable material	δ0.4~0.6mm CRC
6	Applicable Shell length	350mm~1400mm
7	Applicable Shell diameter	φ310~500mm
8	Provided necking expand core size	Φ310,φ360,φ410,φ460
9	Logistics lines before and after the machine	Conveyer which matching previous welding equipment, and conveyer which connecting next punching step.
10	Equipment housing construction	Adopts whole steel welded construction for housing. The housing has been carry out heat treatment after finish welding which brings enough strength and hardness, the machining after that can provide good accuracy.
11	Equipment housing construction	After tightened the expand cord radial runout ≤0.15mm, can ensure diameter size shiftable, accuracy will be repeated.
12	Shell barrel appearance requirement	Barrel will be deformed by the expand core after necking process. The shell surface will not be deformed after all process steps. .
13	Necking area appearance requirement.	Free of any wave folding shape, no any repair required after process (Applicable for 0.6mm and 0.4mm sheet).
14	Design speed	3pcs/min (calculate based on Φ410 * 600 * 0.6mm Shell, suitable for both inward & outward joint connecting).
15	Life of necking blade	Necking blade working life is no less than 600K cycles
16	Dimension accuracy requirement	Necking dimension should satisfy drawings, should ensure dimension stable, accuracy ≤ ±0.3mm, length tolerance ≤ ±1mm
17	Convey system	Workpiece logistics will be done automatically, including workpiece clamp and feed in, reverse and turnover, before&after steps connecting, no manual operation required (exclude people to monitor)
18		Critical necking rotate blade and expand core already have racing protection, can be racing. Process chamber is sealed completely, but can be monitored through transparent window; configured Photoelectric automatic protection function.
19	Operation method	Provide manual and automatic two working modes
20	Operation description	The machine is configured HMI function, all parameters can be set on HMI as per actual requirement; can finish different workpiece shift setting on HMI except expand core change.
21	Equipment maintainability	With Fault self-test function, have enough maintain space, components are easy to be disassembled.
22	Fixture change	Two trained workers can finish different diameter&length necking fixture (necking blade and expand core) change within 20mins
23	Machine dimension	Working table height: 700-800mm. Match with Hanyan’s equipment

Packaging & Shipping

Our Services

1. 12 months free warranty.

2. Lifetime warranty

3. Technical support

4. Customized