Petroleum Products Kinematic Viscosity Tester

Product Model: JF265 (Conventional Manual)

Product Introduction

This instrument is suitable for measuring the viscosity of petroleum products. The mechanism of the

instrument: measure the time that a certain volume of liquid flows through a calibrated glass

capillary viscometer under gravity at a constant temperature, the product of the capillary constant of

the viscometer and the flow time is the kinematic viscosity of the liquid at this temperature.

Technical Parameter

1. Applicable standards: ASTM D445, ISO3104, DIN51366

2. Temperature control method: PID digital temperature controller

3. Temperature control accuracy: ±0.1℃

4. Temperature control range: room temperature～100℃

4. Heating method: electric heating tube heating

5. Power of the whole machine: 2KW

6. Working unit: 4 pipes, equipped with sliding hammer

7. Working power supply: AC220,240V/50,60Hz

8. Instrument size: 360*360*520mm

9. Net weight: 20KG

Features

1. 360° transparent structure, easy to observe;

2. All-aluminum operating table, the surface is treated by oxidation drawing;

3. The sputtering turbine liquid circulator improves the temperature uniformity of the upper, middle

and lower parts of the bathtub;

4. Four samples can be tested at the same time, which is convenient for parallel samples;

5. High-power solid-state relay control output, no voltage leakage;

6. There is a stirrer on the electronic heating bath;

7. Stainless steel heater;

8. The thermostat displays the heating state;

9. Safety protection device to prevent overheating and low water level;

10. Imported Omron PID thermostat, digital display temperature, degree 0.1℃