Brake Fluid Stroke Simulation Test Machine      

Product model: JF4925

Product Introduction

This instrument is suitable for evaluating the lubricating performance and material adaptability of brake fluid. Under the specified test requirements, a total of 85,000 stroke tests are carried out to observe the changes of related materials. 

Technical Parameter

1. Applicable standard: ISO4925

2. Pressure range: 7Mpa±0.3 Mpa

3. Pressure control: precision regulator valve

4. Pressure display: precision pressure gauge

5. Stroke rate: 1000 times/h

6. Number of trips: 85000 times

7. Temperature range: 20~150℃±2℃

8. Temperature control method: digital display PID temperature controller

9. Refrigeration method: compressor refrigeration

10. Timing method: digital display timer

11. Alarm mode: wind alarm

12. Working power supply: AC220V 50HZ

Performance characteristics

1. A cast iron brake main pump, cylinder diameter: 28.58mm~28.65mm, aluminum alloy piston, diameter: 28.52mm~28.55mm;

2. Three brake cylinders, cylinder diameter: 28.60mm~28.66mm, aluminum alloy piston, diameter: 28.52mm~28.55mm;

3. A set of special pump body adjustment mounting plate;

4. The main line pipe adopts uncoated steel pipe;

5. A set of standard drive mechanism can generate 8 Mpa working pressure;

6. Digital display stroke rate, with adjustment device;

7. No radiation heating system;

8. The rubber cup meets the standard requirements;

9. Microcomputer temperature controller, digital display, temperature control range: 20~150℃±2℃, PT100 temperature sensor, high precision;

10. The pressure gauge shows the working pressure, and the precision regulator valve is adjusted, the pressure: 7Mpa±0.3 Mpa;

11. Digital timer, wind alarm;

12. The fully enclosed compressor is used for refrigeration, and the gas circulation reduces the temperature of the test chamber;

13. One-piece structure, easy to operate;