Taijia UTG21-PR Ultrasonic Tank Liquid Level Meter Ultrasonic Level Sensor
Negotiable
Min.Order:1
System | Integrated two-wire system | ||
Basic parameters | Measurement range | 0~5m, 0~10m, 0~15m, 0~20m | |
Block dist. | 0.35~0.6m | ||
Precision | ±0.3%FS* (standard conditions *) | ||
Resolution | ±2mm | ||
Input | Supply voltage | DC12~36V / AC 85~264V | |
Maximum current | 50mA~100mA | ||
Ripple wave requirement | Less than ±200mV | ||
Output | Simulated current | Load 500Ω | |
Digital interface | Rs485 / ModBus-RTU | ||
Interface | Process interface | G1 1/2” or G2” | |
Electrical interface | PG11 | ||
Material | Transmitter | ABS | |
Probe | Ordinary waterproof ABS / anti-corrosion ETFE | ||
Flange | Ordinary waterproof ABS/ anti-corrosion ETFE | ||
Environmental condition | Environment temperature | -20℃~+60℃. Liquid crystal display is limited if it is lower than -20℃. If outdoor instrument is exposed to sunlight directly, add ultraviolet-proof protective cover. | |
Waterproof grade | IP65 | ||
Process condition | Process temperature | -40℃~+90℃, high-temperature probe shall be used in case of over 70℃. | |
Process pressure | 0.8~3bar or 0.08~0.3Mbar abs / below 3000 meters altitude. | ||
Probe Cable Length | RVVP 4*0.3 / less than 200m |