Taijia Open channel flow rate meter,ultrasonic flow meter for arduino ultrasonic flowmeter

Introduction of Open channel ultrasonic flow meter

ULFM series provides accurate non-contact ultrasonic open channel flow measurement

 

Features  of Open channel ultrasonic flow meter

1.Open channel flow rate can be measure per 1mm according to the liqild level. The liquid level change 1mm.open channel flow rate changed with it. Measurement accurancy higher , flow measurement more accurante . 

2.Suitable for variety of flume:Parshall flume,Right-angled triangle weir,Rectangular weir.

3.Variety of flow rate unit is optional

4.Fully closed structure, Strong anti-corrosion

5.Strong anti-interference ability 

6.Low blind zone,High sensitivity,High stability

7.Provide at most 6 relay switch signal

8.MODBUS-RTU digital signal is avaliable.

9.The distance from transmitter to ultrasonic probe can up to 1000m

10.AC and DC power supply is optional. 

11.Romote control set up parameter is avaliable,Easy to operate.

 

Transmitter of Open channel ultrasonic flow meter

Liquid level resolution	1mm.
Liquid level error	1mm or 0.2% of full measurement range (The maximum value, calm water)
Display method	2-line 14 LCD (with backlight)
Instantaneous flow rate range	0.0000~99999L/S or m³/h
Maximum cumulative flow	9999999.9 m³
Analog signal output	one path DC4-20mA current corresponding to flow rate.
Load resistance	0~500Ω
Communications	Serial communication,standard MODBUS-RTU protocol.
Relay Output	upper limit ,lower limit alarm and control.( instantaneous flow rate and water level ) high level ,low level and breakdown alarm ect .
Mode of relay	normally open or closed.(Can be setup)
Quantity of relay	at most six.
Specification of relay	5A 250VAC/30VDC
Power supply	DC: DC24V(±5%)   0.2A AC: AC220V(±5%)  0.1A
Detection Period	1S ( can be adjust)
Ambient Temperature	-40C to +70C
Casing materials	ABS
Protection grade of casing	IP67
Cable gland cover	PG9/PG11/PG13.5
Parameter setting method	3 pcs inductive buttons
Install method	Wall mounted
Casing Size	186X183X126mm

 

Application

Ultrasonic Open Channel Flow meter is non-Contact instrument,Adopt Sound wave reflection principle to measuring liquid level in the water weir trough, Get the flow rate go thought the weir trough by conversion . The instrumeny mainly consist of ultrasonic probe and transmitter ,The materials in all plastic seal structure.can be widely application in Industry, environmental protection and ect industries.Measurement open channel flow rate accurately.