Briquette Machine, description about Factory Directly Sawdust Dryer Briquette Press Machine Biomass Coal Briquette Press Machine For Sawdust on China Suppliers Mobile

Product Details

Product Description

Factory Directly Sawdust Dryer Briquette Press Machine Biomass Coal Briquette Press Machine For Sawdust

--------------------------------------------Machine Introduction--------

This is sawdust briquette making machine.Machine adopt good quality carbon steel,the service life over 10 years.

The material can be various biomass,like palm kernel,peanut shell,branch,logs,ect.The material size must less 5mm.If material too big,we will recommend you crusher according to your requirement.Besides the material size must less 5mm,the moisture of material should be 12%.Too wet or too dry will cause bad forming effect.If your material moisture over 12%,we have sawdust drying machine.Aftercrushing,the material was delivery to drying machine,then it was sent to forming machine.

Detailed Images

Raw material of 1ton/Hr Sawdust Briquette Press Machinery Biomass Coal Briquette Press Dryer Machine For Sawdust

Biomass wastes, such as sawdust,rice husks,coffee husks,rice straw, wheat straw,etc.

Material required: Moisture 8%-12%,size3-5mm.
If moisture>12% may need dryer,We have air flow dryer and drum dryer.
If material size >5mm will need hammer mill or wood crusher.
Raw material -----Crusher------Dryer-----Making rods(Charcoal making machine)------Carbonization furnace---------Finished product

3. Final products of 1ton/Hr Sawdust Briquette Press Machinery Biomass Coal Briquette Press Dryer Machine For Sawdust

------------------------Machine Parameters--------

Model NO.	BY-50	BY-50	BY-80
Productivity (Kg/h)	200-250	250-300	300-400
Motor power (KW)	18.5 kw	40hp	18.5kw—22kw
Weight (kg)	520 kg	550kg	800 kg
Out size (mm)	18006001600	18007001600mm	18007001600
Moisture	5%-10%	5%-10%	5%-10%

Sawdust briquette machine using the inherentcharacteristics of wood raw materials by screwsqueezing , the lignin in the wood raw material isprecipitated under high temperature and highpressure to combine the fine wood fiberplasticization to form a rod-shaped solid fuel.

1.Heat Ring:the heat riwood briquette machine is stainless steel , whichthe inner part is electric heating wire . For our newly designed biomass briquettemachine , the heat ring is increased from 6 rings to 7 rings , that can make thesurface of briquettes smoother than before . There are three sets of heat rings , andthe temperature is more than 350 celsius degree

2.Propeller:The propeller is elaborately made by strong wear-resistant alloy , whiclthe service life has been increased by 3-4 times . It is the main part for pressing thraw material into briquettes

3.Shaping Drum:The shaping drum decided the shapes and diameter of thebriquettes . Also you can have your own ideal shapes , and we will make theshaping drum according to your needs

------------------------------Working Scene-------

------------------------------------Live Shot-------

-----------------------------Parts Display----------

Company Profile

Hengchang headquarters is located in the industrial park in Gongyi City. It covers a total area of 150,000 square meters,including100,000 square meters of standarized workshop. There are more than 200 sets of various large and medium-sized metal processing lathe, riveting machine, welding equipment and assembly equipment. We have more than 300 workers, including more than 20 middle and senior technicians. Hengchang is mainly focus on 4 series products: stone crusher machines, sand making equipment,powder grinding mills, mineral processing equipment and their spare parts. Every year, Hengchang can turn out 1,000 sets of crushers and 10,000 tons of crusher parts.

Exhibition & Customer visit

Our Services

Before-sale services:

We guide customers to choose the best and applicable device; provide the advanced, energy-saving and practical technological processes, as well as we are responsible for the planning and design of the site.
Sale services:
Products must be inspected strictly before being sold; customers are invited to simulate and test machine on-the-spot and raise objections; in accordance with the agreements stipulated in the contract, we will arrange delivery.
After-sale services:
Our Company will send professional engineers to guide device installation, debug and train operators until customers are fully satisfied. Moreover, we will design and produce machines according to the special requirements of customers.
Solemn Promise:
The quality guarantee period of machines is one year except the wearing parts
Tips:
The prices in the web only to be reference,according to raw material's price fluctuations; Specific price is subject to the negotiation.

Packing and delivery

Packaging Details:

Normally the machines are taken apart before delivery and are packed by suitable packing ways, the packing ways are as below: Nude packing. Bundle packing. Grass rope packing. Water proof packing. Wooden pallets packing. Wooden box or carton box packing.
Delivery Time:We will customize according to the actual needs of customers. Senior designers start to design the plan. Afte receiving the deposit, we will complete the delivery within 15 to 25working days.

FAQ

Q:Why we believe in Gongyi Hengchang company?

A: 1.More than 28 years’ experience.

2.Hengchang is the leading professional supplier of solution, equipment’s and service for crushing and grinding industry.

3.Products achieved ISO9001:2000 quality management certificate and EU CE certificate.

Q:Delivery time？

A:The lead time is 10-20 days, Delivery time will vary depending on the type of the machine, shipping method selected and part availability.

Q:Payment terms ?

A: Accepted Payment Type: T/T, L/C, Western Union, Cash and so on. After sign
the contract, pay the 10%-30% deposit of total purchase price and pay the full payment before delivery.

Q:What will you do if the machine is broken down?

A:The Products warranty is one year. We will provide the technical advice and find the solution immediately for you when the machine is in trouble. For those wear parts, we guarantee the high quality parts for long-term supply.

Q:What should i do if I want to get a best quotation?

A:If you want a suitable type for you, please let us know your material and capacity.