Palm wood charcoal manufacturing carbonized oven

Palm wood charcoal manufacturing carbonized oven

Charcoal manufacturing oven is greatly increased carbonizing ratio (increased from about 88% to 99%) and shortened the carbonizing time ( from 24 hours to 6 hours), and shows the features of easy operation, higher safety, high efficiency, and energy saving. It is used to change biomass briquette into charcoal briquette. We can provide the technology for establishing a charcoal furnace. The quality and efficiency of it affect final forming of charcoal briquette greatly.

Working Principle of Charcoal manufacturing oven:

Charcoal manufacturing oven adopts the high-temperature dry sliding carbonization technology to make the man-made briquette to charcoal briquette. It is equipped with hyperploid high temperature stream cooling system, and the process of cooling can be accelerated to speed up the period of the production. Moreover, the stove adopts the structure of unique air storage chamber to fully reuse the smoke produced during the process of carbonization. And 60% of the redundant smoke can be used in drying and carbonizing, saving much fuel during the whole process,and increasing the enterprise revenue.

Data of Charcoal manufacturing oven:

Raw materials of Charcoal manufacturing oven:

1. Tree branches whose diameter is more than 30mm.
2. Some nut shells, such coconut shell, walnut shell, etc.
3. Biomass briquettes made from sawdust, small agriculture wastes.

Square type of Charcoal manufacturing oven:

Round type of Charcoal manufacturing oven:

Characteristics of Charcoal manufacturing oven:  

1.New type of carbonization equipment, production higher than general furnace, fast speed, high carbon, simple operation

2.With smoke purification device, can store tar, no leakage, long service life;

3.Suitable for wood, logs, mechanism charcoal, nut shell, bamboo, etc, different shaps biomass raw material.

Advantages of Charcoal manufacturing oven:                                   

No polution: there are two reasons : the frog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again. We install a special device that can use the liquid gas as the energy to heating the carbonization kiln, and it will not produce any smoke. 

Carbonize time more shorter: This type have three inner stove, when one inner stove finished (6- 8hours ) , use the hoist tools lift the inner stove out let it cooled naturally, at the same time, lift the other one in , 3 inner stove can work continuously. 24 hours can carbonizing 3-4 inner stove.

Easy operate: One people can control 2-3set, but need the crane for help; When one inner stove have been finished carbonization, use the hoisting tools hoist the inner stove from the outer stove, then let the inner stove natural cooling, at the same time, put another inner stove into the outer stove, which will save a lot of cooling time, so the productivity effect increase a lot.

Final production of Charcoal manufacturing oven:

Many customers came to visit us: