Coconut shell bamboo oak wood Horizontal charcoal making furnace stove kiln
Negotiable
Min.Order:1
Gongyi Dongxing Material Trade Co., Ltd.
China hoist smokeless barbecue lump wood charcoal furnace machine to make charcoal
Continuous olive wastes palm coconut wood barbecue making Retort furnace for charcoal
Rotary continuous rice husk sawdust olive wastes charcoal making kiln
Rotary kiln coconut shell rice husk olive wastes charcoal biochar machine
2022 new Large capacity continuous horizontal smokeless carbonization furnace
Africa Asia Hoist model smokeless biochar wood charcoal carbonization stove made in China
Introduction of Horizontal charcoal making furnace stove kiln:
This Horizontal charcoal making furnace was developed by our factory latest modular air coking furnace, more Efficient than old type carbonized furnace, greatly shorten the production cycle, improve the efficiency of charcoal production, is an ideal equipment of large and medium scale charcoal production of charcoal. It uses a unique storage chamber structure, make full use of the flue gas produced by carbonization. In addition to their use of the stove, achieve energy conservation and environmental protection requirements.Energy-saving air coking furnace: simple and convenient, need not power and mobile production.It is an ideal equipment of family scale production.
It adopts the advanced carbonized technology heat flow,carbonized rate increased significantly,The carbonized rate is about 80%, up by 99%.And the operation is very convenient, good safety,high production efficiency,can save a lot of energy, good environmental protection performance.Shunt can also dry burning boiler flue gas and so on.Truly the charcoal,gas and oil range of equipment.Is currently the world's most advanced carbonization furnace.
Technology parameter of Horizontal charcoal making furnace stove kiln
Model |
DX-170A |
DX-170B |
DX-190 |
Volume |
3CBM |
10CBM |
15CBM |
Inner pot size |
1.7*2.8m |
1.7*4.8m |
1.9*5.3m |
Capacity |
1tons charcoal/day |
1.5tons/day |
2-2.5tons/day |
Carbonization time |
6-8hours |
8-10hours |
8-10hours |
Machine size |
3.5*2.2*2.4m |
5.3*2.2*2.45m |
5.5*2.1*2.1m |
Weight |
4000kg |
4800kg |
7000kg |
8417809090 |
|||
It includes: 1*kiln car, rail, purify system, smoke pipe, temperature gauge |
Kiln car of charcoal making furnace stove kiln
1.Due to its design principle of rotary type,reduce its carbonization time
2.it can use different material as the fuel.
3.Saving energy, it can reuse the smoke produced during the process of carbonization.
4.Compare with the hoist type carbonization, its biggest advantage is that it doesn't need any hoist equipment.
Advantage of Horizontal charcoal making furnace stove kiln
1.It adopts the advanced carbonized technology heat flow,carbonized rate increased significantly,
2.The carbonized rate is about 80%, up by 99%.And the operation is very convenient, good safety,
3.high production efficiency,can save a lot of energy, good environmental protection performance.
4.Shunt can also dry burning boiler flue gas and so on.Truly the charcoal,gas and oil range of equipment.
5.Is currently the world's most advanced carbonization furnace.
Specifications of Horizontal charcoal making furnace stove kiln
In the carbonization process ,can produce combustible gas,can recycle these gas.These gas delivery to the white tank through No.1 pipeline,then open the valve of the No.2 pipeline, these gas can reach to the bottom of the furnace through the No.2 pipeline.At the No.4 valve, you can be connected to a pipeline at the No.4 valve, so that can use the extra gas,these gas can cooking, burnning boiler etc.So can save some cost, it is enery-saving.This is shunt tank, at the Nbottom(NO.5) can collect the wood tar.
Final charcoal from Horizontal charcoal making furnace stove kiln
Package and shipping of Horizontal charcoal making furnace stove kiln:
We normally load machine to container directly, but in order to pretect machine, we use plastic film to wrap machine, then load.
Pre-sale:
♦ We will recommend best model machine for our cilents depends on their materials, material moisture, size, capacity,etc
♦ Provide best quality, best price, best service
After-sale:
♦ We can arrange our engineer install and set uop new equipment until customer satisfied.
♦ we will send customer maunal and necessary documents to help them to learn and know more knowledge. Master the technique of our machine how to get good quality charcoal.
24hours online for service you!!!
Gongyi Dongxing Machinery company is specialized in the import, export and wholesale biomass charcoal machinery production line,
like: wood crusher, sawdust dryer, briquette machine, and carbonization stove,etc. The final briquette or charcoal are best fuel for barbecue or boiler.
Our aim is to supply the market with top quality charcoal equipment, and provide best service and best price for our customer.
Thanks very much for client's trust!
1.What is the carbonization rate?
This carbonization rate can reach to 99%.
2.Could you offer complete Horizontal charcoal making furnace?
Yes, we will allocate suitable production line according to your special requirement, such as Gasifier Equipment, Dust-Removal Device, Gascleaner, Auto-feeding Conveyor,Cooling and Discharging Conveyor,Manual automatic dual-use electric control cabinet, and related machines, etc.
3.Do you provide equipment operation training?
Yes. We can send professional engineers to the working site for equipment installation, adjustment, and operation training. All of our engineers have passports.
4.Where is your factory located? How to get there?
We are located in Gongyi city, Henan province, China.Our nearest airport is Zhengzhou International Airport, and the Airport Code is CGO.We will pick you up at airport.
If you are interest in our machine contact me at any time!
Horizontal charcoal making furnace stove kiln