Brand:FOXBORO

Type:A2H124-24FX P0973BJ

Origin: the United States

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

The SS823 Voting Unit has double overvoltage protection circuit on both inputs. It is also able to detect both short and open circuit in the voting element. For details see Table 120. Block diagram and dimensions for SS823 see Figure 102 and Figure 103. Table 120 and Table 121 shows supervision data and technical data for SS823. For connection of SS823 in a redundant configuration see Figure 104.

SS832 is can be used directly for load up to 10 A and for loads up to 20 A two SS832 modules must be used. See Figure 106 and Figure 107. For Block diagram and connections of SS832 see Figure 105 and Figure 108. Table 122 and Table 123 shows supervision data and technical data respectively. Figure 109 shows connection of SS832 in redundant configuration with maximum 10 A load, see Figure 110 for load up to 20 A.

TC562 Modem Unit – (Westermo MD-12DC) Description The TC562 Short Distance Modem unit can be used both for point-to-point communication and for communication over a distance between pieces of Figure 110. SS832 Redundant Configuration up to 20 A Figure 111. TC562 (MD-12DC) Modem TC U J TC562 Modem Unit – (Westermo MD-12DC) Appendix A Hardware Units 390 3BSE036351-510 A equipment or units, for example a computer and printer or a robotic device. ABB recommends their use when the distance between units/equipment exceeds 15 m. For further details refer to the manufacturer's documentation (Westermo). Using a modem allows distances between pieces of equipment to be as much as 18000 m, and, depending on the distance, can provide a data transmission speed of up to 38400 bit/s. The modems are manufactured for simple mounting onto a standard 35 mm DIN-rail. 

Transfer between modems takes place along two twisted pair cables, one at full or half duplex and the other at simplex. The transfer distance is fully dependent on cable resistance and capacitance. ABB recommends a minimum cable gauge of 0.2 mm2 with a capacitance of 40-80 pF/m within an industrial environment. For an office environment, ABB recommends a minimum cable of 0.14 mm, and a capacitance of 40-100 pF/m. Use a shielded cable in a heavy industrial environment and an unshielded cable in an office environment. A shielded cable is often given a higher capacitance and will therefore provide a higher data transmission speed.