Brand:ABB

Type:5SHY35L4520 5SXE10-0181 AC10272001R0101

Origin: the Swiss

Warranty: 365 days

Colour: new/used

Shipping method: Courier delivery

Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

CE Compliance All products comply with EMC Directive EMCD 2004/108/EC and Low Voltage Directive LVD 2006/95/EC. Products are CE-marked. Some products require enclosures, as specified in User Guides, to meet the EMC Directives. Compliance is verified through conformity with the following minimum standards: • EMC Directive EMCD 2004/108/EC. • EN 61131-2 Product standard, Programmable controllers. • EN 61000-6-4 Generic emission standard. • EN 61000-6-2 Generic immunity standard. • Low Voltage Directive LVD 2006/95/EC.

Installation Requirements Installation regulations for all products are included in relevant product documentation. Some general installation rules and applications are given below. Laying Field Cables There are no special requirements for laying field and communication cables connected to products. However: Cables for short-distance communication without modems should always be routed at a distance of 10 cm (4 in.) from other cables. All product-connected cables should be routed at a distance of 30 cm (12 in.) from non-product power cables (heavy current cables) and 10 cm (4 in.) from class 4 cables of relevant international immunity standards. Types of Field Cable Shielded cables are always necessary for: • Communications (see product documentation for cable type) • High-frequency pulse transmission (see product documentation for cable type) • Low-level analog signals, for example Pt100 and thermocouples For other applications unshielded cables may be used. Digital and analog signals of the same type can be run on the same cable. Signal and return conductors should be located on the same cable. DIN-Rail Mounting It is required that the DIN-rail is properly attached to either the prefabricated aluminum profile or a metal sheet with conductive surface. The fulfilment of this requirement will ensure mechanical stability and enable a stable and well defined ground plane for the chassis, which is of great importance from EMC perspective.