BNFD-L10 Series Laboratory Freeze Dryer
Model Selection Guide
S (Standard type): It is suitable for freeze-drying bulk (liquid, pasty, solid) conventional materials.
ST (Standard Top Press Type): It is not only suitable for freeze-drying of bulk (liquid, pasty, solid) conventional substances, but also suitable
for drying of Vials materials. When preparing for freeze-drying, the materials are separated into Vials according to the need. After flfloating the
cap, the freeze-drying process start. After drying, the top press device is operated to tighten the cap, which can avoid secondary pollution,
re-adsorb water, and is easy to store for a long time.
M (Manifold type): It is not only suitable for the freeze-drying of bulk (liquid, pasty, solid) conventional materials, but also can be fifitted with
flflasks outside the drying chamber to dry the materials rotated inside the bottle wall. At this time, the flflask is connected to the manifold outside
the drying chamber as a container. The material in the flflask is heated at room temperature. Through the Manifold switch device, the flflask can
be removed or loaded at any time as needed without stopping the machine.
MT (Manifold Top Press Type): On the basis of the characteristics of the Standard type, it combines the characteristics of the Top Press type
and the Manifold type. It is suitable for freeze-drying of bulk (liquid,pasty, solid) conventional material ; suitable for drying of vials materials.
When preparing for freeze-drying, the materials are separated into vials according to the need. After flfloating the cap, the freeze-drying
process start. After drying, the top press device is operated to tighten the cap, which can avoid secondary pollution, re-adsorb water, and
easy to be stored for a long time The flflask is used to dry the material whirled inside the flflask. At this time, the flflask is connected to the manifold
outside the drying chamber as a container. The material in the flflask is heated at room temperature .Through the manifold switch device, the
flflask can be removed or loaded at any time as needed without stopping the machine.
T (T-type): It is suitable for the preservation of microorganisms such as bacteria and fungi in ampoule tubes. The ampoule storage method
is often used in laboratories. The samples were packaged in small ampoules after freeze-drying. It has the advantages of Long-term preserva
tion, small variation, easy storage and Widely used.
Please send inquiry>>
If you need any detail packing information, please contact us>>
If you have any question, please contact us>>
Main Products: , , ,
Facebook
X
Pinterest
Linkedln