Industrial Servo Motor Yaskawa 5.39N.m 200V AC Servo Motor SGMGH-09ACA6C
QUICK DETAILS
Power : 850W
Voltage:200V
Rated Current : 7.1A
DESCRIPTION
AC Servo Motor
SGMAV Sigma-5
YASKAWA ELECTRIC
SEPCIFICATIONS
| Brand Name | Yaskawa |
| Model Number | Industrial Servo Motor Yaskawa 5.39N.m 200V AC Servo Motor SGMGH-09ACA41 |
| Place of Origin | Japan |
| Current | 7.1A |
| Voltage | 200V |
| Speed | 1500/min |
| Power | 850W |
| Ins | F |
| N.m | 5.39 |
* Are external motor disconnects required between the motor and the VFD? Service disconnects at motor loads are very often used for maintenance purposes. Normally, removing a load from a VFD while operating does not pose a problem for the VFD. On the other hand, introducing a load to a VFD by closing a motor disconnect while the VFD is operational can be fatal to the VFD.
When a motor is Started at full voltage, as would happen in this case, high currents are generated, usually about six times the full load amps of the motor current. The VFD would see these high currents as being well beyond its capabilities and would go into a protective trip or fail altogether. A simple solution for this condition is to interlock the VFD run permissive circuit with the service disconnects via an auxiliary contact at the service disconnect. When the disconnect is closed, a permissive run signal restarts the VFD at low voltage and frequency.
* Are there power factor correction capacitors being switched or existing on the intended motor loads? Switching of power factor capacitors usually generates power disturbances in the distribution system. Many VFDs can and will be affected by this. Isolation transformers or line reactors may be required for these applications.
NOTE
Avoid getting thinner on other parts of the Servomotor when cleaning the shaft.
Storage:
When the Servomotor is to be stored with the power cable disconnected, store it in the following temperature range:
Between −20°C and 60°C
Installation sites:
The Servomotor SGM and SGMP types are designed for indoor use.
Install Servomotor in an environment which meets the following conditions:
Free from corrosive and explosive gases
Well-ventilated and free from dust and moisture
Ambient temperature of 0 to 40°C
Relative humidity of 20% to 80% (non-condensing)
Inspection and cleaning can be performed easily
If the Servomotor is used in a location subject to water or oil mist, install a shield cover over the Servomotor.
SIMILAR PRODUCTS
| SGMAV-04A3A6C | SGMAV-04ADA21 |
| SGMAV-04ADA2C | SGMAV-04ADA61 |
| SGMAV-04ADAH12C | SGMAV-04ADAHB21 |
| SGMAV-06A3A21 | SGMAV-06A3A61 |
| SGMAV-06A3A6C | SGMAV-06A3A6S |
| SGMAV-06ADA21 | SGMAV-06ADA2C |
| SGMAV-02A3A6S | SGMAV-02ADA21 |
| SGMAV-08A3A61 | SGMAV-02ADAHB21 |
| SGMAV-08ADA21 | SGMAV-08A3A2C |
| SGMAV-08A3A21 | SGMAV-06ADAHB2 |
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- | Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- | Emerson VE-,KJ- |
| Honeywell TC-,TK- | GE Modules IC - |
| Fanuc motor A0- | Yokogawa transmitter EJA- |
Main Products: Mitsubishi AC Servo Motor ,servo drives ,circuit break
Business license
Business Type: Distributor/Wholesaler
Facebook
X
Pinterest
Linkedln