Sgmgh type rated speed of servo motor: 1500r/min. Power: 1.8kw.

Power supply voltage: three-phase ac200v. Serial encoder: 17 bit relative value. Design sequence: a.

Shaft end: taper 1/10, with parallel key. Option: with oil seal

High speed feed series: occasions where high-speed operation is required without load. The power supply of the main circuit and the control circuit are completely separated,

In case of alarm, only the power supply of the main circuit can be turned off, which is easy to maintain. Sgdm-01ada parameter setter is built-in.

Parameters can be directly input by the servo driver body. Save wiring.

Serial encoder is adopted, and the number of encoder wiring is reduced by 112 compared with the original product.

Multi in one control: torque, position and speed control can be used instead of parameter switching. 2-V series servo motor sgmps type rated output: 100W (0.1kw). Power supply voltage: ac200v

Serial encoder: 17 bit absolute value type (standard). Design sequence: IP55 (standard).

Shaft end: straight shaft, without keyway (standard). Optional: with oil seal.

Correspondence of RoHS Directive: comply with ROHS directive. Intermediate inertia

Flat type with short depth

Equipped with high-resolution serial encoder (17 bits), the maximum speed is 6000r / min

Complete varieties (100w~1.5kw, with holding brake) standard IP55. It is also applicable to IP67 (optional). Rating and specification: rated time: continuous. Vibration level: V15.

Insulation resistance: DC500v, above 10m Ω. Ambient temperature: 0~40 ℃. Excitation mode: permanent magnet type. Installation method: flange type. Heat resistance grade: B

Insulation and withstand voltage: ac1500v1 minutes.

Protection mode: totally enclosed self cooling IP65 (except for the shaft through part). Operating environment humidity: 20~80% (no condensation). Connection method: direct connection.

Rotation direction: CCW rotation when viewed from the load side under the forward rotation command. 2-V series servo motor sgmgv type. Rated output: 15kw. Power supply voltage: AC400V

Serial encoder: 20 bit absolute value type (standard). Design sequence: standard.

Shaft end: straight shaft, without keyway (standard). Optional: with holding brake (DC24V),

The feed shaft drive of various machines (high-speed feed).

Complete varieties (300w~15kw, with holding brake). Equipped with high-resolution serial encoder (20 bits). IP67 is adopted as the standard.

Application example: machine tool. Conveying machinery. Handling machinery.

Food processing machinery. Rating and specification: rated time: continuous vibration level: V15.

Insulation resistance: DC500v, above 10m Ω. Operating ambient temperature: 0~40 °℃. Excitation mode: permanent magnet type.

Installation method: flange type. Heat resistance grade: F.

Insulation and withstand voltage: ac1500v1 minutes (200V level), ac1800v1 minutes (400V level). Protection mode: totally enclosed self cooling IP67 (except for the shaft through part). Operating environment humidity: 20~80% (no condensation). Connection method: direct connection.

Rotation direction: CCW rotation when viewed from the load side under the forward rotation command.