GPON ONU and Ethernet device, description about 10/100M single mode 2 ethernet ports optic fiber media converters on China Suppliers Mobile

Product Details

10/100M single mode 2 ethernet ports

optic fiber media converters

Brief introduction:

This product supports IEEE802.3UI100Base-Tx/Fx protocol, as well as full duplex and half duplex mode. This manual is for this switch. The following purchasing guide is for customers reference.

1. Interface

RJ-45 interface

The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire

Fiber interface:

SC/ST/FC optical fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber).

2. Connection

The network device (work station, hub or switch ) with RJ-45 interface is connected to RJ-45 jack of switch through twisted-pair. And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver. Then switch on. The corresponding LED is on for correct connection.

Main features:

1. In conformity to IEEE 802.3 10 Base-T standard.In conformity to IEEE 802.3u 100 Base-TX/FX standard.

2. Support 1k MAC address.

3. Back pressure flow control for full duplex IEEE 802.3X and half duplex.

4. Automatic identification of MDI/MDI-X cross line.

5. Support max forwarding packet length 1552/ 1536 bytes option.

6. In conformity to safety code of FCC and 15 CLASS A and CE MARK.

Technical parameters:

1. Standard Protocol: IEEE802.3 10 Base-T standard

IEEE 802.3u 100Base-TX/FX standard

2.Connector: two UTPRJ-45connector,one SC/STconnector

3. Operation mode: full duplex mode or half duplex mode