EPON GPON XPON FTTH ONU PG-GE3014XR 1GE+1FE+WIFI
Negotiable
Min.Order:1
1GE+1FE+CATV new 2.4GHz 5dBi onu iptv wifi epon gpon xpon onu ont with wifi catv
1000M Media Converter 2fx Ports+ 4rj45 Ports Communication Equipment
10/100M 8 Ethernet ports SC gigabit optical fiber port POE media converter Ethernet switch
10/100/1000M adaptive media converter,2 SFP ports 2 Ethernet ports optic fiber switch,china supplier
Card type Gigabit single mode 1310nm SC 20km chassis fiber optic media converter
1. Overview
PG-GE3014XR is designed as HGU (Home Gateway Unit) in deferent FTTH solutions by HDV, The carrier-class FTTH application provides data service access.
PG-GE3014XR is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT.
PG-GE3014XR adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0 and GPON Standard of ITU-TG.984.X
PG-GE3014XR is designed by Realtek chipset 9603C
2. Functional Feature
Support EPON/GPON mode and switch mode automatically
Support ONU auto-discovery/Link detection/remote upgrade of software
WAN connections support Route and Bridge mode
Route mode supports PPPoE/DHCP/ static IP
Support WIFI Interface and multiple SSID
Support QoS and DBA
Support port Isolation and port vlan configuration
Support Firewall function and IGMP Snooping/Proxy multicast feature
Support LAN IP and DHCP Server configuration
Support Port Forwarding and Loop-Detect
Support TR069 remote configuration and maintenance
Specialized design for system breakdown prevention to maintain stable system
3. Hardware Specification
Details |
|
PON Interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) |
Receiving sensitivity: ≤-27dBm |
|
Transmitting optical power: 0~+4dBm |
|
Transmission distance: 20KM |
|
Wavelength |
TX: 1310nm, RX: 1490nm |
Optical Interface |
SC/UPC Connector |
LAN Interface |
1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
Wireless |
Compliant with IEEE802.11b/g/n, |
Operating frequency: 2.400-2.4835GHz |
|
support MIMO, rate up to 300Mbps, |
|
2T2R,2 external antenna 5dBi, |
|
Support: multiple SSID |
|
Channel: Auto |
|
Modulation type: DSSS, CCK and OFDM |
|
Encoding scheme: BPSK, QPSK, 16QAM and 64QAM |
|
LED |
7 LED, For Status of WIFI,WPS,PWR,LOS,PON,LAN1~LAN2 |
Push-Button |
3,For Function of Reset,WLAN,WPS |
Operating Condition |
Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) |
|
Storing Condition |
Temperature: -30℃~+60℃ |
Humidity: 10%~90%(non-condensing) |
|
Power Supply |
DC 12V/1A |
Power Consumption |
≤6W |
Dimension |
155mm×92mm×34mm(L×W×H) |
Net Weight |
0.24Kg |
4. Panel lights Introduction
Pilot Lamp |
Status |
Description |
WIFI |
On |
The WIFI interface is up. |
Blink |
The WIFI interface is sending or/and receiving data (ACT). |
|
Off |
The WIFI interface is down. |
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
Off |
The WIFI interface does not establish a secure connection. |
|
PWR |
On |
The device is powered up. |
Off |
The device is powered down. |
|
LOS |
Blink |
The device doses not receive optical signals. |
Off |
The device has received optical signal. |
|
PON |
On |
The device has registered to the PON system. |
Blink |
The device is registering the PON system. |
|
Off |
The device registration is incorrect. |
|
LAN1~LAN2 |
On |
Port (LANx) is connected properly (LINK). |
Blink |
Port (LANx) is sending or/and receiving data (ACT). |
|
Off |
Port (LANx) connection exception or not connected. |
5. Application
Typical Solution:FTTO(Office), FTTB(Building),FTTH(Home)
Typical Business:INTERNET,IPTV,IP Camera ,WIFI etc
6. Ordering information
Product Name |
Product Model |
Descriptions |
SFF Type XPON ONU |
1G1F+WIFI |
1x10/100/1000Mbps Ethernet, 1 x 10/100Mbps Ethernet , 1 SC/UPC Connector, 2.4GHz WIFI, Plastic Casing, External power supply adapter |