CO2 laser tube, buy Reci W6 130W 150W Laser Tube for Co2 Lazer Engraving Machine on China Suppliers Mobile

Product Details

Reci laser tube for Co2 laser engraving machine

Product Description

Reci W6 150W laser tube is suitable for leather carving and hollow-out,cloth cutting,lampshade making,signs,marks and artwork processing,having excellent engraving and cutting performances.

Specification

Packing & Delivery

Company Profile

Jinan Remax Machinery Technology Co.,LTD is a professional cnc router manufacturer, after ten years of efforts, our company already independent R&D and manufacture of molds engraving and milling machine, large CNC woodworking engraving machine, woodworking engraving and milling machine, CNC advertising engraving machine, CNC stone engraving machine, CNC linear and disk auto tool changer machines, CNC plasma cutter machines, laser cutting and engraving machine, laser cutting machine, metal laser cutting machine, styrofoam machining centers etc machines, since the establishment of our company, with professional technology and advanced management concepts, the rapid rise in the field of Numerical Control, has developed into research and development, production and sales of high-tech enterprises, the products have been widely used in the advertising industry, woodworking industry, craft gifts, architectural models, electronics, CAD / CAM industry mold industry, decoration, clothing, packaging, printing, dyeing, logos, seals, etc industries; and because of its distinct cost-effective domestic and in various application fields has been completely replace imported similar products, and become the leading companies in the industry.

FAQ

1.Installation RequirementMake sure to follow the operation instruction of model Z4 as shown in the illustration.The dedicated power DY13 should be equipped.The positive pole of laser tube is in high voltage (the ignition voltage is 24kv).It may cause the following consequence when it is failed to follow the instruction:Arcing;the inner tube will be punctured by electricity and may cause water leakage.

2.Operation conditions Water cooling: using purified water;3 to 5 liter/minute;water temperature:10℃-40℃The operating environment: temperature 2-40℃;humidity 1060%The working current: test current is 30mA.

Maximum working current is 30mA. The running current must be kept below 28mA.The life span can reach 10000 hours if the current is kept below 26mA. The ammeter must be connected to the negative electrode of laser tube.When it is working under overhigh current for long term,the negative pole will appear brown yellow,and the life span will be shortened rapidly.To protect dust from going into the insulation sheath, please wrap it with plastic film.

3.Working PerformanceCutting function.Engraving function:Very good.When the working current is 4mA and the tube is in the state of preionization,the laser can be used for high-frequency impulse engraving.

4.Key NotesDo not clean the exterior surface of the output widow mirror with tools such as tampon;otherwise the output power will be seriously affected.The followings are the designated methods to clean up pollution in the exterior surface of window mirror: 1) When the mirror is polluted,do not turn on the laser. 2) Blow the mirror surface sideways with an air blower. 3) Spray the pure alcohol on the mirror surface with sprayer. 4) Turn on the laser after the alcohol gets fully volatilized.

5) If the methods above don't work effectively,it is necessary to ask for the professional to use tampon withalcohol to clean the mirrorsurface from middle to edge.The best solution is to prevent the window from

being polluted. Attention: it is forbidden to clean the mirror with acetone.The screws in the front and back ends of the laser tube are not allowed to be moved,otherwise the out power will be declined, even the tube will be scrapped.Put the acryl 300mm far away from output mirror,when testing its laser spot.

5.SafetyThe laser beam is invisible light. Please wear protective glasses when debugging the laser.The positive pole is in high voltage. Pay attention to the security marks.

6.Storage and Transportation Requirement Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40℃, and the requested humidity is 10-60%.

Pack the laser as in the original way. Important notes: it is requested to use adhesive tape to cement the sponge together with laser tube to prevent the tube from vertically sliding during transportation.

The sponge in the side of output mirror must be 70 mm beyond it,and the sponge in the side of reflecting mirror must be50 mm wider

7.Tubes operated in wrong way are not guaranteed by Manufacturer.