vacuum chamber for drying

Main technical characteristics

Advanced vacuum system design, enough condensate water release in the low temperature condenser, effectively prevent the contamination to the vacuum pump caused by the moisture in the drying process.

According to the b chamber body temperature during the heating process, adopt repeatedly alternating pressure automatically, periodically lower vacuum pressure in the tank to a certain value, to create the most suitable conditions for the evaporation of water within the insulation body, so that moisture from the drying vaporation process in a reasonable best state.

Through the alternating pressure drying process, product can effectively solve the rust problem of iron core during the drying process.

The level of automation andthe level of the product of the treatment process of this equipment , reach advanced international level, and the product qualitycan reach the superior level product in the industry.

Main components

1. Vacuum drying chamber system…………………………………………………..1 set
2. Door open system………………………………..…………………………………1 set
3. Trolley and driving device………………………………………………….….……1 set
4. Vacuum system………………………………………………………………………1 set
5. Low temperature condensate system……………………………………….…….1 set
6. Heating system……………………………………………………………………….1 set
7. Pneumatic pipeline system………………………………………………….………1 set
8. Cooling water system………………………………………………………………..1 set
9. Hydraulic system……………………………………………………………………..1 set
10. Control system………………………………………………………..………………1 set
11. Heat preservation cover……………….……………………………………………..1 set
12. Spare parts…………………………………………………………………………….1 set

Welcome to contact us