Main Techcnial Data
I. Main Technical Parameters
1. Width of table: 3300mm
2. Length of table (core column length): 3500mm
3. Capacity of load: 35 Ton
4. Column span: 500 to 1500 mm adjustable
5. Turning speed: 90s / 90 degree (step less adjust)
6. Work level of table: 1750mm
II. Main Machine Structures
1. Base frame: As the foundation of the entire equipment, it has sufficient rigidity and strength. It is welded by shaped steel and then vibratory stress relief treatment.
2. Support rod: When stacking iron cores, it bears the weight of the entire platform and iron core together with the oil cylinder.
3. Turnover seat: As a platform of the stacking cores, it is also used as a moving foundation for movable longitudinal beams. When turning over, it has to withstand the ejection force of the oil cylinder, has sufficient rigidity and strength. It is welded by shaped steel and then vibratory stress relief treatment. The seat is closed platform under the assembly rods.
4. Oil cylinder and hydraulic system: It provides power for turning and can be self-locked to ensure that it can stop at any
position when turning. The oil cylinder adopts high-quality engineering oil cylinder, the hydraulic system adopts Siemens Beide motor, Japan Yuken oil pump, Beijing Huade hydraulic valves, and Japanese imported seals, the system has high performance, durable and stable.
5. Longitudinal beam: It consists of a set of fixed longitudinal beams and two groups of movable longitudinal beams, on which stacked iron accessories are placed. The fixed stringer can be moved to adapt to different core column distances Mo. The moveable beams are adjusted by hand wheel.
6. Support jack: It is used for supporting iron yoke clips, the height can be adjusted, a total of 12 pieces.
7. Bottom support: It is a detachable structure. It can be disassembled and moved by crane. There are lock pins to fix, easy to assemble and disassemble.
8. Core column support: It is made of shaped steel with precision machining to ensure that the flatness of the entire laminated iron is 1mm. The limb is placed from the top to reduce the amount of adjustment. A total of 15 pieces of supports.
9. Electronic control system: It has the necessary functions of emergency stop, overload protection, logic interlocking, etc. All components adopt international brands such as ABB and Schneider.
10. The front and back of the stacking table are equipped with a set of platforms for workers. The height adjustment range is about 900~1700mm, using hydraulic scissor fork lift, with detachable safety barriers on three sides. During working, the platform can move up and down freely, so the workers can have convenient working positions. The wheels of the platform can move in four direction and has lock on wheel. It can move under the assembly platform.
III. Main Machine Components Brands
1. Hydraulic pump: Yuken Japan
2. Pump motor: Siemens Beide (China)
3. Hydraulic valve: Beijing Huade (China Top Brand)
4. Hydraulic seals: Japan imported
5. Breaker/Contactor/Relay/Button: ABB or Schneider