The surge protector TP20D is a power surge protector; it is used for surge protection of commercial lighting power supplies such as street lighting (ClassI2, ClassII3) and landscape lighting, as well as surge protection for power ports such as security, electrical appliances, and sockets.

TP20D has a fully sealed shell, waterproof, dustproof, IP65 protection level. The lightning protection device adopts full mode protection, applies UVT technology, and has leakage current and freewheeling interruption functions. The product is small in size, and comes with L, N and PE connecting lines, which is very convenient for installation and application. The product has a maximum lightning protection current of 20kA and can withstand a surge voltage of 20kV.

 

 

Surge protector characteristics:

Nominal discharge voltage: 20kV, 1.2/50μs

Maximum discharge current: 20kA, 8/20μs

Executive standard: IEC/EN61643-11/UL14494th

Parallel SPD equipment

UVT ultra-low voltage technology, more adequate protection

comes with lead for easy connection

Ultra-thin shape: 79.5×38.6×16.5, easy to install

IP65 waterproof and dustproof

The installation of Class I and Class II lamps meeting the rated voltage of 110~277VAC

Through TTF rigorous test, superior performance

Passed CB, UL, TUV and CE inspection certificates

a variety of wiring method combinations, while meeting the needs of series and parallel wiring

 

8/20μs Surge Waveform Test (RUILON laboratory):

 

 

Surge protector electrical parameters:

Rated working voltage: 277VAC

Maximum continuous working voltage: 277VAC

wire specification: 1.3/16mm2/AWG

Installation method: Custom

 

Surge parameters of surge protector:

Nominal discharge current (8/20μs) (In): 10kA

Maximum discharge current (8/20μs) (Imax): 20kA

Nominal discharge voltage (1.2/50μs) (Vn): 20kV

Maximum discharge voltage (1.2/50μs) (Vmax): 40kV

Voltage protection level (Up):

L/N-PE: 1100V

N-PE: 1800V

 

Surge protector storage and transportation parameters:

Shell material: ABS765A(94V0)

Working temperature: -40~80℃

Protection level: IP65

Size: 79.5×38.6×16.5mm

Weight (single): 77(±3)g

Packing box size: 315×290×272mm

FCL quantity: 150pcs

 

 Applications of Surge Protective Devices:

Surge protector application:

1. Outdoor and commercial lighting                                          2.Wall washer lighting

3. LED lighting                                                                          4. Garage, parking lot lighting

5. Road lighting                                                                         6. Flood lighting

7. Traffic lighting                                                                        8.Tunnel lighting

9. Digital signage                                                                      10. Street lighting

11.Security power supply

 

Product Description:

 

Note:

1. The connection line of the lightning arrester will be connected after tining.

2. If there are no wiring terminals, wires should be welded, and the welds need to do isolation treatment.

3.L--Brown; N--Blue; PE-- Yellow and Green.

 

Contact us:

 

 

 

Promises:

The manufacturer promises that during the warranty period, if our products have any defects, we will apply for a free replacement for you. We are sincere to every customer and our service is very good. If you have any questions, you can call our customer service immediately. Until you are satisfied with our sevice.

 

 

 

 

Contact us:

Ruilongyuan Electronics Co., Ltd. We are a manufacturer of electronic components in China, the brand is RUILON, the ex-factory price, and there is no middleman. New original, Price and quality are guaranteed. if you are interest, please contact us at any moment!

 

Main Products:
Transient Voltage Suppressors(TVS)
Thyristor Surge Suppressors(TSS)
Protection Device TVS/ESD Arrays
Glass Gas Discharge Tubes (GGD)
Positive Thermal Coefficent (PTC)
Metal Oxide Varistors (MOV)
Surge Protective Device (SPD)

 

 

Buy 100pcs Surge Protective Devices and give ONE away!!!!!