RUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base Station

RUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base Station

Negotiable

Min.Order:1

Supply Ability:
1000 per Month
Payment Terms:
T/T Credit Card

Shenzhen Ruilongyuan Electronics Co., Ltd.

Business Type: Trading Company
Main Products: , , ,

Product Details

RUILON 10kA Outside Surge Protection Module Surge Protector LED Driver Surge Protection Device 5G Base Station Surge Arrester 

 

 

Product Description

TM10P277 is an onboard power supply lightning protection module; it is used for surge protection of commercial lighting, communication base stations, security, electrical appliances, sockets and other power ports. The lightning arrester adopts full-mode protection, applies UVT technology, and has extremely low residual voltage; it also has leakage current and continuous current interruption functions. The product is small in size and can be placed on the PCB circuit board in the form of a device, which is very convenient for installation and application. The maximum lightning protection current of this product is 10kA, and the nominal discharge current is 10kA.

 

RUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base Station

RUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base Station
Lightning protection device application:

commercial lighting

Security power supply

Communication power supply

industrial power supply

precision machine tool

Engine room socket

Single phase motor

New energy power supply

Solar powered 5G base station

 


SPD features:

Nominal discharge current: 5kA, 8/20μs;

Maximum discharge current: 10kA, 8/20μs;

Executive standard: UL14494th;

Parallel SPD equipment; UVT ultra-low voltage technology, more adequate protection;

Onboard components, soldered directly on the PCB;

Compact appearance: 31.4×20.4×18.2, easy to install;

Meet the voltage range of 110~277VAC; After rigorous TTF test, the performance is superior.

 


Electrical parameters:

Rated working voltage: 277VAC

Maximum continuous working voltage (MCOV): 277VAC

wire specification: 18VAC

Installation method: CustomAWG

 


Surge parameters:

Nominal discharge current (8/20μs) (In): 5kA

Maximum discharge current (8/20μs) (Imax): 10kA

Nominal discharge voltage (1.2/50μs) (Vn): 10kV

Maximum discharge voltage (1.2/50μs) (Vmax): 20kV

Voltage protection level (Up):

L-N: 950V

L-PE: 950V

N-PE: 1600V

 


Storage and transportation parameters:

Shell material: ABS765A(94V0)

Working environment temperature range: -40~80℃

Protection level: IP65

Size: 31.4×20.4×18.2mm

Weight (single): 25(±3)g

Packing box size: 395x267x285mm

Number of boxes: 210pcs

 


Parameter Description:

Rated working voltage: The normal AC power voltage rating assigned to the SPD by the manufacturer (quoted from UL14494th).

Maximum AC voltage range: The maximum effective value of AC voltage that can be continuously applied to the SPD.

Maximum continuous working voltage (MCOV): the maximum r.m.s. voltage that can be continuously applied to the SPD (quoted from UL14494th)

Maximum continuous working voltage (Uc): the maximum r.m.s. voltage that can be continuously applied to the SPD (quoted from IEC61643-11)

Nominal discharge current: The peak value of the current selected by the manufacturer, through the SPD, the current waveform is 8/20μs, and the SPD maintains the function after 15 surges (quoted from UL14494th).

Maximum discharge current: The peak value of the SPD current that has an 8/20μs waveform and the amplitude claimed by the manufacturer. Belongs to T2 test type (quoted from IEC61643-11)

Voltage protection level: The maximum voltage expected to appear between the two ends of the SPD due to the impulse voltage of the specified gradient and the impulse current of the specified amplitude and waveform (quoted from IEC61643-11).

 


Repeat the surge capability test:

 

RUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base Station

1. Surge impact test data: Refers to the number of times the product must be tolerated during the surge level grading test carried out in accordance with the implemented standards.

2, TTF (Test to fail): Refers to the fault critical value of the number of impacts that the product can withstand under the set surge level. TTF test is a test item set by RUILON laboratory to understand the performance limit of surge protection products.

 

 

Typical package information:

 

 RUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base Station

Note:

1. The connection line of the lightning arrester will be connected after tining.

2. If there are no wiring terminals, wires should be welded, and the welds need to do isolation treatment.

3.L--Brown; N--Blue; PE-- Yellow and Green.

RUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base StationRUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base Station

RUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base Station

8/20μs Surge Waveform Test(RUILON laboratory):

RUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base Station

RUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base StationRUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base StationRUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base Station

RUILON Brand 10kA Outside Surge Protection Module Protector LED Driver Surge Protection Device for 5G Base Station 

 

Promises:

The manufacturer promises that during the warranty period, if our products have any defects, we will apply for a free replacement for you. We are sincere to every customer and our service is very good. If you have any questions, you can call our customer service immediately. Until you are satisfied with our sevice.

 

 

 

 

Contact us:

Ruilongyuan Electronics Co., Ltd. We are a manufacturer of electronic components in China, the brand is RUILON, the ex-factory price, and there is no middleman. New original, Price and quality are guaranteed. if you are interest, please contact us at any moment!

 

Main Products:
Transient Voltage Suppressors(TVS)
Thyristor Surge Suppressors(TSS)
Protection Device TVS/ESD Arrays
Glass Gas Discharge Tubes (GGD)
Positive Thermal Coefficent (PTC)
Metal Oxide Varistors (MOV)
Surge Protective Device (SPD)

 

Buy 100pcs Surge Protective Devices and give ONE away!!!!!

 

Contact Supplier

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Electrical Equipment & Supplies > Power Distribution Equipment
Categories
Hi~