ESE Lightning Arrester Surge Protection for House

  

• Leader stroke in advance 60ms,conduct lightning to ground in advance.
• More protection diameter than the normal lightning arrester.
• Conduct the electrical currents to ground, no phenomenon of shielding failure nor side stroke.
• Attractive appearance,stainless steel meterial,can be set under the severe environment.
• Maintenance-free, do not need connect additional power.
• Activate itself only when the thunderbolt forming, completely early discharge initially.

 

 

DK8-BX10 ESE(Early Stream Emission) Lightning Rod is composed of the following sections:

a. Main receiving lightning point:It is made up of copper alloy. It connects from downlead terminal to receiving lightning point forming a uninterrupted path to convey the lightning current to the ground.It is fixed in a lightning rod(tower)pole more than 2 meters high.

b. Discharge strike spark board;generate spark.

c. Active discharge point:collect the electric energy.

d. Waterproof stainless steel box:store the electrostatic field energy.

e. Side point of receiving lightning: it is made up of stainless steel. It can convery surrounding lightning current to the ground directly.

f. Stainless steel sleeve.

g. Install fasteners.

h. Down lead connection point.

 

 

 

Model	DK8-BX10
Discharge Capacity	200kA (10/350μs)
Amplitude Damping Radio	≥ 70%
Gradient Damping Multiplying Radio	≥ 48
Time of Activate in Advance	60μs
Currents Limiting Impedance Value	≤ 3Ω
Earthing Resistance	≤10Ω
Wind Load	≤36m/s
Height(m)	0.6m+1meter+installation accessories
Weight(kg)	7.5kg
Earthing Downlead	One piece or multi pieces of steel bar (steel flat) Diameter (or equal sectional area) shall be no less than 8mm

 

Suitable for protection of the direct lightning stroke to the following objects:

Buildings,MDBS(Mobile Database Station), small satellite station, warehouse, meteorological observatory station, LPG station, guidance station in airport, military radar station.