Lightning Rod Series, buy High Quality Lightning Copper Rod ESE Lightning Rod for Lightning System on China Suppliers Mobile

Product Details

Installation Instructions

Installation Guide Installing DK8-BX10 ESE lightning rod shell comply with national standard of P.R China(GB50057-94)-Code for design protection of structures against lightning.The actual construction shall comply with National Standard of P.R China(GB 50169-92)Code for construction and acceptance of grounding connection electric equipment installation engineering. Do not install or test the lightning rod in a thunderstorm weather!

a.Please notify us the technical parameters of your lightning rod mast when ordering, so that the factory can select the right interconnection splice for you to install components successfully.

b.The thickness of lightning rod’s sleeve shall not less than 4mm, which can be used as a down-conductor. There shall be two points symmetric connecting the earth electrode.

c.When the structure’s lightning protection system has more than 1 down-conductor, breaking of contact with insulation protection for each down-conductor is recommended. And the breaking of contact shall be set at 1.5～1.8m high from ground of the conductor.

d.The joint between lightning rod and down-conductor shall be welded.

e.The construction order for the earth-termination system of lightning rod shall be from top to bottom. The common earthing system shall be installed first, and then come to the down-conductor, and the lightning rod is the last step.

f.Do not touch the main capture head and initiative discharge fang when installing!

g.The product design service life is 30 years.

Introduction Lightning Rod is composed of the following sections: a. Main receiving lightning point:It is made up of copper alloy. It connects from downlead terminal to receiving lightning point forming a uninterrupted path to convey the lightning current to the ground.It is fixed in a lightning rod(tower)pole more than 2 meters high. b. Discharge strike spark board;generate spark. c. Active discharge point:collect the electric energy. d. Waterproof stainless steel box:store the electrostatic field energy. e. Side point of receiving lightning: it is made up of stainless steel. It can convery surrounding lightning current to the ground directly. f. Stainless steel sleeve. g. Install fasteners. h. Down lead connection point.

Specification

Material	Stainless Steel
Keyword	Thunder Lightning Arrester
Product name	ESE Lighting Rod
Earthing Resistance	≤10Ω
Currents Limiting Impedance Value	≤ 3Ω
Discharge Capacity	200kA (10/350μs)
Amplitude Damping Radio	≥ 70%
Gradient Damping Multiplying Radio	≥ 48
Time of Activate in Advance	40μs
Currents Limiting Impedance Value	≤ 3Ω

Certifications

Company Profile

Test items: a. 150kA surge current b. 1200kV surge voltage c. SPD through flow and residual voltage research d. SPD response time (1ns) research e. SPD operational voltage and drain current research f. Signal transmission characteristic (attenuation, standing-wave ratio) research g. Grounding method research h. Lightning arrester research i. Some special researches required by clients j. Variety test experiments required by regulations

Packing & Delivery

Carton package. If there is any special requests, we will adjust the packing according to your requirements.

FAQ

1. who are we?
We are based in Guangxi, China, start from 1998,sell to Oceania(25.00%),Western Europe(10.00%),Eastern Asia(10.00%),Mid East(10.00%),Domestic Market(10.00%),Southeast Asia(10.00%),Eastern Europe(10.00%),South America(10.00%),North America(5.00%). There are total about 101-200 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Surge Protector,Lightning Rod,PV Supporting Equipments,power cord,signal protection

4. why should you buy from us not from other suppliers?
Guangxi Dikai Sci & Tech Co., Ltd.has been specialized in producing lightning protective products, researching development of lightning protective technology, consulting lightning protection service, and engineering lightning protection cases for 32 years.

5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,Express Delivery；
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Western Union,Cash;
Language Spoken:English,Chinese,Spanish

DK Cheap Stainless Steel Suppressor Gun Popuar Primed Lightning Rod Lightning Arrester Brands