DK-JS6 waterproof IP67 surge counter digit outdoor 6 digitals lightning strike counter
Products Description
DK-JS6 water-proof lightning strike counter is a universal type lightning counter. When the lightning protection circuit system is normal, there is no lightning current in the discharge line, the lightning counter don't count. When the lightning current is discharged to the ground, the lightning counter can induce it and counts correctly.
DK-JS6 water-proof lightning strike counter is suitable for all SPD, lightning rod, etc. It can induce the discharge current and count, and then display the number of lightning strike in the screen. This Lightning Counter can count accurately. If power failure, the operational data won’t lose. It takes the advantages of dust-proof and water-proof, etc.
Type | Waterproof Lightning Strike Counter | ||||||
Minimum Counting Current(8/20μs) | ≥5kA | ||||||
Count Number | 0-999999 times | ||||||
Sampling Pattern | Induction sampling | ||||||
Down Conductor Maximum Diameter | D≤20mm | ||||||
Measure L*W*H | 100×68×70mm | ||||||
Working Humidity | Not more than 95% | ||||||
Operating Temperature | -40～＋850C | ||||||
Maintenance
DK-JS6 waterproof lightning counter doesn’t need special maintenance. Annually, to check the ground wire of power SPD or the down conductor bareness part of lightning rod, to see whether the contact segment is well connected or not. If the down conductor is non-oxidation or rusty, it will effect the counting of lightning counter.
When there is no display in the screen, or the screen is not clear, please screw out the four screws and open the cover, replace the battery inside to the same model battery.
Details Images
Installation Instructions
1) DK-JS6 waterproof lightning counter can be installed in the grounding wire of SPD or the bareness part of down-conductor. The installation diagram is as follow:
2) Loosen the two screw nuts in the back of lightning counter, spring washer and flat gasket, remove the clamp, to put the ground wire of power SPD and or the down conductor bareness part of lightning rod between the two screw nuts, and then put the pressing plate, flat gasket, spring washer, screw nuts, tighten the two screw nuts.
3) Pay attention to ground wire of power SPD or the down conductor Installation and wiring diagram(bareness part of lightning rod and the mounting plate, pressing plate. The contact segment must be well connected to low down the contact resistance, to make sure the counting accuracy.r reference only,in kind mainly)
2) Loosen the two screw nuts in the back of lightning counter, spring washer and flat gasket, remove the clamp, to put the ground wire of power SPD and or the down conductor bareness part of lightning rod between the two screw nuts, and then put the pressing plate, flat gasket, spring washer, screw nuts, tighten the two screw nuts.
3) Pay attention to ground wire of power SPD or the down conductor Installation and wiring diagram(bareness part of lightning rod and the mounting plate, pressing plate. The contact segment must be well connected to low down the contact resistance, to make sure the counting accuracy.r reference only,in kind mainly)
Certifications
Company Profile
Established in June, 1989, Guangxi Dikai Sci&Tech Co., Ltd. arouses its all efforts and strives for progress for near 30 years to be the earliest founding and most well-known professional lightning protection company with the most complete lightning protection products and highest lightning protection qualification.
Dikai Company is consist of Guangxi Dikai Sci&Tech Co., Ltd. and Guangxi Dikai Dikai Lightning Protection Engineering Co., Ltd. Guangxi Dikai Sci&Tech Co., Ltd. concentrates on new technology of lightning protection, research and development on new products, production and service. Guangxi Dikai Dikai Lightning Protection Engineering Co., Ltd. concentrates on design of lightning protection engineering, construction, inspection and maintenance, technical consulting service. It has provided more than 10 millions cases of lightning protection project design, product installation, inspection and maintenance, technical consulting service to electric power, transportation, communication, security, civil aviation, finance, petroleum and petrochemical, education, radio and television, military, industrial and mineral enterprises, etc. Dikai Company has started business with USA, Malaysia, Indonesia, Philippines, Korea, India, Sri Lanka, Rwanda, Nigeria, Cambodia, Kazakhstan, Bulgaria, and so on.
Dikai Company covers five product series: Direct lightning protection products, power line surge protection products, signal line surge protection products, combined series surge protection products, and grounding resistance reduction products, with more than 100 varieties of products. It is the one top purchasing and service provider of surge & lightning protection products.
Dikai Company is located in national level high-tech zone with an area of 40000 square meters. It has R&D center, several production lines of SPD, National Accredited Laboratory(CNAS)/Testing Center of lightning protection products, and lightning proving ground. (CNAS) Laboratory is the most advanced testing ground used in lightning protection theoretical research, product development, discussion on the method, provision theory validation and experimental check in the lightning protection regulatio for an integrated. It is the autonomous region level enterprise technology center and patent testing point in Guangxi, owning nearly hundred patents, double Grade A qualifications of lightning professional design and construction. Products are CE certified. And Dikai Company has passed through the three System Certifications of ISO9001 International Quality Management System, ISO14001 Environmental Management System, OHSAS18001 Occupational Health and Safety Management System(OHSAS).
Product packaging
FAQ
Q:Are you factory or Trading Company?
A:We are a factory with 32 years experience, we can provide customers with OEM, ODM customization and more competitive prices.
Q: Which certification or standard do you have?
A: CE/ISO9001/CQC/CNAS and so on.
Q: How to control product quality?
A: Our company has our own laboratory and will be randomly selected to test quality for large quantities. Every product will be tested for voltage and current which need pass the test.
Q: About the delivery time.
A: 7-30 days, depends on the quantity. Plz confirm the delivery time with sales-managers when you order.
Q. Can I get discounts?
A: Yes, for big order, old customer and frequent customers, we give reasonable discounts.
Q: Which Shipment way is available?
A:Ocean shipping, Air transport, express delivery.
A:We are a factory with 32 years experience, we can provide customers with OEM, ODM customization and more competitive prices.
Q: Which certification or standard do you have?
A: CE/ISO9001/CQC/CNAS and so on.
Q: How to control product quality?
A: Our company has our own laboratory and will be randomly selected to test quality for large quantities. Every product will be tested for voltage and current which need pass the test.
Q: About the delivery time.
A: 7-30 days, depends on the quantity. Plz confirm the delivery time with sales-managers when you order.
Q. Can I get discounts?
A: Yes, for big order, old customer and frequent customers, we give reasonable discounts.
Q: Which Shipment way is available?
A:Ocean shipping, Air transport, express delivery.
DK-JS6 waterproof IP67 surge counter digit outdoor 6 digitals lightning strike counter