Coal Dryer, buy High Efficient Coal Sludge Coal Slime Coal Slurry Dryer for sale on China Suppliers Mobile

Product Details

Working Principle

Coal drum dryer is mainly composed of hot blast stove, belt feeding machine, drum dryer, belt discharging machine, induced draft fan, cyclone dust collector, bag filter (or wet dust collector) and operation control system.Equipment used downstream drying process, its working principle is as follows: wet material after entering drying drum divided into the following workaround: one is the feeding area, the coal into the area exchaged with high temperature and hot air quickly evaporate moisture, the material in large Angle of guide plate copy, to be imported under a workspace;2 The copy plate area, the coal in this area is copying by copy board forming curtain material, the material with good contact with hot air, the moisture in coal rapid evaporation become water vapor, water vapor was siphoned off by induced draft fan, so as to achieve the aim of coal drying;The moisture of coal in this area is less than 15% (or less) under state of loose, after heat exchange the materials achieves the required moisture state,and discharging out;Three is discharging area, do not set copy plate roller in the region, the material in this area scroll taxiing to the discharge port,then complete the whole drying process.

Below is Drying Process

Technical Parameters

Model	Input capacity（t/d）	Raw material moisture（%）	Outlet moisture（%）	Total power（kw）	*Covering area(mm)**
DLMG1916	300	≤30	13±2	130	42*16
DLMG2220	500					150	46*16
DLMG2522	800					200	48*16
DLMG2825	1000					250	51*16
DLMG3026	1300					280	52*18
DLMG3228	1500					330	55*18
DLMG3430	1800					380	56*18
DLMG3632	2200					450	58*18
DLMG3835	2700					560	60*18
DLMG4036	3000					660	60*18

Packing & Delivery

Below is Dingli Group Service Items:

Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized solution and manufacture customized products for you.
3. Welcome your visit.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.

Below are Dingli Customers Visiting:

Dingli Dryer Production Line has exported to over 30 countries with 300 foreign partners, such as Germany, Britain, United States, Italy, Israel, Chile, Thailand, Russia, Vietnam, India, Cambodia, Indonesia, Malaysia, Thailand etc.

Below are Installation Sites of Our Customers:

After reach deals, Dingli Engineer will fly to your address, install and adjust machine for you freely.
Also train you operation skills, until you are satisfied.

FAQ

Contact Information