Promotional Products, buy Excellent Quality Brewery Waste Beer Spent Grains Rotary Drum Dryer On Sale on China Suppliers Mobile

Product Details

Excellent Quality Brewery Waste Beer Spent Grains Rotary Drum Dryer On Sale

Product Description

Capability	1-5 ton/ h
Power	34-135 kw
Dry Material Moisture	15%(Adjustable)
Heat Source	Suitable for biomass, steam, natural gas and other heat sources.

Product Introduction

BSG are major by-products in beer production. However, high moisture (80-85%) brings a lot of problems in utilization and transportation. Today the best way to solve this problem is to dehydrate BSG and transfer them into composite feed, which could be effectively absorbed. According to the need of different livestock, people could make variable feed by adding specific additive such as trace element. In this way, BSG could get fully used, which could bring priceless environmental benefits and economic benefits. By considering the situation of the global market, our company cooperated with the relevant designing institute, eventually designing and manufacturing the ‘extruding-desiccation machine plus BSG dryer’ systems.

The new product line could fulfill continues and stable production and has the characterization of low cost, easy installation and maintenance, and less need for labor. Meanwhile, the product moisture of the dehydration process and drying process could separately approach 50-65% and 12%, which is satisfying. According to the test report of national feed quality supervision, inspection and test center, the nutrient in BSG will not lose in the process of dehydration and drying. Currently, we could provide a different series of drying equipment to meet the demand of different beer suppliers.

Brewer's grains dryer mainly consists of a heat source, feeding machines, feeder, rotary drum, discharging machine, draft fan, discharge and power distribution cabinet.

Main Features

1. This dryer has a high degree of mechanization, large production capacity and continuous operation. 2. Structure was simple and excellent. Materials pass stably through the cylinder's resistance. Convenient to operate. 3. Low failure rate. Low maintenance cost and energy consumption. 4. Good uniformity of dried products. Bright color. Pleasant aroma. Nutrients remain unchanged.

Working Principle

Below is Drying Process

BSG with 85% moisture are delivered into the screw dehydration machine (or belt dehydration machine) and dehydrated to 50% to 60% moisture content. Then the dehydrated product was delivered into the rotary dryer by screw conveyor for the drying process. High-temperature air heated by furnace could has full mass and heat exchange with BSG, taking away the moisture. The dry materials could pass through the drum quickly with the air force. Wet materials would be dropped gradually and get the fully dried. The eventual dry materials would be delivered out of the systems through screw conveyor.

Below is Working Principle

Cool material flow:After the dehydration, BSG is delivered to the cylinder and realize the concurrent drying process. Wet materials are lifted up and down by the internal flights and pushed through three layers in spiraling pattern, which realize the heat exchange between cool materials and heated air. The dry materials could pass through the drum quickly with the air force. Wet materials would be dropped gradually and get the fully dried to 10% to 15% moisture. The eventual dry materials would be delivered out of the systems through screw conveyor. Inside the drum, there are vibration cleaning device, which could prevent the adhesion between materials and drum. Hot fluid(air) flow:Cool air is compressed into furnace through blower and heated to 500℃ to 500℃. Then the heated air taken into the drum by draught fan would exchange the heat with wet materials, absorb the moisture and get delivered out of the drum with the temperature reduction of 55 to 60℃. The exhaust gas will be dealt with cyclone dust extractor and wet dust extractor, which would eventually meet the exhaustion requirement.

Technical Parameters

Model(DLSG)	1409	1615	2008/3	2010/3	2210/3	2510/3	2512/3	2912/3
Input Capacity(t/h)	0.85	1.60	2.89	3.68	4.02	4.95	5.84	6.75
Output Capacity(t/h)	0.40	0.75	1.36	1.73	1.89	2.33	2.75	3.18
Vaporization(t/h)	0.45	0.85	1.53	1.95	2.13	2.62	3.09	3.57
Early Moisture(%)	60±5%
Final Moisture(%)	15%(adjustable)
Drying Temperature(°C)	350±30℃
Total Power(KW)	34	45	78	90	105	125	140	155
Total Weight(T)	22	28	40	45	50	60	68	76
Plant Area(m*m)	5*15	6*22	8*16	8*18	8*20	10*20	10*24	10*24
Except above models, we also can supply special model according to your requirements.

Packaging & Shipping & Service

Packaging & Shipping

Your equipment will be well tested before leaving the factory and will be well packaged for long distance ground and sea transport without damage.

Our Services Items

Pre-sale

1. According to your needs, select right model for you.

2. According to your special requirements, design customized solution and manufacture customized products for you.

3. Welcome your visit.

Sale

1. Sign contract, pay deposit, we arrange production.

2. Product acceptance.

3. Help you formulate construction scheme.

After-sale

1. Assign engineer service for you on-site freely.

2. Install and adjust device, train how to operate.

3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.

About Dingli Group

Our DingLi Group company was founded in 2005, is currently compose of Zhengzhou Dingli New Energy Technology Co., Ltd, Zhengzhou Drying Technology Co., Ltd, Zhengzhou Jiutian Machinery Co., Ltd and Zhengzhou Engineering Technology Research Center, which was the only innovative and comprehensive enterprise with research, design, manufacture, sales and service in the domestic drying industry. Group owns 8 series equipment such as the dehydration series, drying series, thermal series, crushing series, granulating series, conveying series, environmental protection series and electric control equipment, besides we own more than 150 kinds of high-tech products.

Dingli Group Honors

The certificates that we have got, such as CE, ISO, SGS and so on.

Buyer & Project Case

Customers Visiting

More than 300 customers from Southeast Asia, Central Asia, Eastern Europe, Africa and South America have visited our company.The communication is very smooth, and most of the customers are very satisfied with the solutions and services we provide.

Project Cases

Our equipment has exported to over 80 countries, such as Germany, Britain, United States, Italy, Israel, Chile, Thailand, Russia, Vietnam, India, Cambodia, Indonesia, Malaysia, Thailand etc.

FAQ

Q1: What's your business model? Trading company or factory?

A: We are a 15 years factory, all our machinery are manufactured by ourselves, factory direct sales, product quality and after-sales service can be guarantee.

Q2: Can I visit your factory?

A: Yes. Many domestic and international customers visit our factory every year. Our company is located in Zhengzhou Henan province, China, you can come here by air or train. The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO. We will pick you up at airport. Welcome to visit our factory.

Q3: What is the Quality of your products?

A: Dingli Group products come with best quality, and our products passed CE certification, exported to lots countries around the word, such as Australia, Malaysia, India, Italy ,Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured with the quality absolutely.

Q4: Do you provide after-sale service?

A: Yes. The warranty period of our machines is one year, and we have a professional after-sale service team to promptly and thoroughly solve your problems.

Contact Information

Welcome To Contact Us

If you are interested in our equipments, or have any questions, please don't hesitate to contact us.