carbonization furnace, buy Mustard Husk Stalk Continuous Carbonization Stove Manufacturer on China Suppliers Mobile

Product Details

Mustard Husk Stalk Continuous Carbonization Stove Manufacturer

Wood log carbonization kiln for charcoal Is an airflow carbonization stove,whhich used for carbonizing wood ,sawdust briquette,coal, bamboo,coconut shell into charcoal.

High Productivity Charcoal Making Machine South Africa Advantage :

1.Not only it has best carbonization effect and shortest carbonization time,

2.It can collect wood tar oil and exhaust gas.

3.After processed, this gas can used recycling fuel.

4.Also it is no any open fire, totally dry distillation

5.The carbonization temperature can be controlled and adjusted,highest temperature can reach 800-1000 °C

Capacity:	5-6t/24H for wood nriquettes charcoal
Process time:	Normally it take 6-8 hours, according to moisture of your raw material,dry cost less time (8-12% is better )
Raw material:	Machine-made charcoal,natural wood,coconut shell,wood briquette,bamboo,almond shell,palm shells
Labor save:	1-3 people
Energy saving:	20-30 firewood or 15kg liquid gas.

Model	Power	Weight	Capacity	Whole machine include
QHL-1(single type)	0.22kw	3.3t	2.5-3t/24h	1outer stove, 3inner stoves with 3 caps, 1 3ton lifting device, 1 smoking tank
QHL-2( two-connected type)	1.5kw	6.8t	5-6t/24h	2 outer stove, 6 inner stoves with 6 caps, one 5-ton hoisting equipment with e-motor, 2 smoking tank
QHL-3 (three-connected type)	1.5kw	10.5t	7.5-9t/24h	3 outer stove, 9 inner stoves with 9caps, one 5-ton hoisting equipment with e-motor,3 smoking tank
QHL-4 (four-connected type)	1.5kw	11.6t	10-12t/24h	4 outer stove, 12 inner stoves with 12caps, one 5-ton hoisting equipment with e-motor,4 smoking tank

Application about High Productivity Charcoal Making Machine South Africa

1.For bbq or burning for warm;
2.Use our charcoal mixer get charcoal powder then use our different charcoal machine to get different charcoal shapes then bbq or burning for warm. 1.For bbq or burning for warm;

*Using our charcoal press ball machine to make charcoal balls

*Using charcoal powder extruder to make charcoal briquettes

*Using our hydraulic tablet press to make shisha charcoal

Working Principle about High Productivity Charcoal Making Machine South Africa
1.HeatHow to produce charcoal? It is divided into three processes:

After sealing, heat the furnace with wood chips or gas. First, use a 10-minute fire to burn. When the temperature reaches 90 degrees Celsius, switch to a slow fire. This process takes 80-120 minutes to reduce water vapor in the material.

2. Pyrolysis
Continuous heating, when the temperature reaches 180-235 degrees Celsius for 3-5 hours, gas will be generated in the process. This gas is then used as fuel for heating. The whole process takes about 8 hours. When the temperature reaches the maximum and decreases, the carbonization process will end.

3. Heat dissipation
Hang the inner pot on the outside and seal the tube of the lid. Let it cool naturally. The cooling time is longer and the charcoal quality is good. When the temperature is below 50 degrees, you can remove the charcoal. Otherwise, when oxygen in the air comes into contact, the charcoal will burn again.

Structure about about High Productivity Charcoal Making Machine South Africa
includes heating room (for heating the inner stove), furnace body and heat-keeping layer (it is made of the heat insulating material)(1) Outer stove

(2) Inner stove
Consist of the stove tank body and the sealed top cap. They are made of the heat resistance thermal steel, three inner stove can be stacked together for saving space and shipping cost.

(3) Smoking recycle tube
During the process of carbonizing, there will be some smoke.( can be burning) the smoke can be collected and returned to the furnace.

(4) Purification tank
This system is consisting of purification tank and the exhaust-heated cycle pipe.

(5) Hoisting equipment
it include the steel hoisting frame and the E-hoist .And it is easy for loading and unloading the stove.

Packaging & Shipping

For one set we packed in standard container.For more sets machines, we pack them in the standard container.

Our Services

Respect customers; Committed to improving the total value of customers.
1) Take pictures (including raw materials, semi-finished products, final products and
Loading product)
1) Check and accept the product before delivery.
2) Prepare all customs clearance documents so that customers can clear customs smoothly.
After-sales service:
Provide thoughtful services to minimize customer worries.
1) Provide civil engineering drawings of the equipment.
2) Free training (including installation and maintenance) for each customer.
3) Install and debug equipment to ensure that the dryer runs smoothly.
4) Check the equipment regularly.
5) Promptly eliminate the fault promptly at the scene.
6) Distribution of guaranteed accessories from household to household.
7) Provide technical communication and support.
8) Provide maintenance for large items.
9) Provide customers with wearing parts at the best price.