biomass briquette machine, buy Equipment For The Production Of Fuel Briquettes From Sawdust Corn Cob Briquette Machine on China Suppliers Mobile

Product Details

Product Description

Equipment For The Production Of Fuel Briquettes From Sawdust Corn Cob Briquette Machine is a kind of energy recycling equipment which is also named biomass charcoal machine, used to make pollution-free fuel briquettes from various biomass materials (sawdust, straw, rice husk, etc). During the molding process, the surface of briquettes is carbonized through high temperature and high pressure. So briquettes have higher combustion heat compared to burning wood chips directly.

Raw material

The raw material could be : coconut shell, sawdust, woodchips, bamboo shavings, tree bark, chestnut shell, cotton stalk, corn stalk, corn cob, sugarcane waste, shrugs, etc.

Final product

1.the diameter is 50-80mm occurs in the hollow quadrangular or hexagonal cylinde or hollow hexagonal with a 15-20mm hole through the body.

2.The length of the finished Briquette of Sawdust Woodchips Charcoal Hexagonal Shape Making Machine can be 50mm,60mm,70mm,80mm. And we can control and chang it according to your requirements.

Working flowchart

1. Crush the raw material into small pieces (size is about 3-5mm), if your raw material size is big;
2. Dry the material by the dryer machine or dried it in the sun, till the moisture is less than 8%- 12%; if your raw material moisture content is higher than 8-12%;
3. Put the dried material into feeding inlet of briquette machine by worker or by screw conveyor;
4. Produce the briquette from the dried material without any additive by the wood briquette machine;
5. Carbonized the briquette and become charcoal briquette.

Detailed Images

Heating rings

1. A set of machines requires three coil heaters, the diameter can be adjusted.

2.1ps coil heater requires a 1.5-3kw motor.

3. The basic structure consists of compacted MgO, high temperature resistant wire and chrome steel.

Propeller

Special chrome alloy 45# steel body, alloy powder coating

1. The most important part, also called screw propeller.

2. wear-resistant, high pressure resistance, high wear resistance.

3.The angle should be repaired after 12-15ton.

4. Different materials require different pitches.

Forming tube

Tungsten alloy

1. determines the shape of the final product, diameter.

2. thickness: 12mm, length: 38-45cm, diameter 50-80mm

3. 50-60mm suitable for making charcoal, 70-80mm for the production of biomass fuel.

4. New type, high wear resistance, no need to wear sleeve.

Thermostat

temperature control

The best make wood briquette temperature is about 300 degrees, and the temperature is controlled to prevent it from being too high or too low.

Company Profile

Gongyi Xiaoyi Mingyang Machinery plant is located in Zhengzhou.Henan province. Our machineryplant is specialize in WOOD BRIQUETTE MACHINE 26 years.

There have production line of makingwood charcoal briquette(including crusher , dryer , wood briquette machine, carbonization stove) ,

production line of making wood pellet (including crusher, dryer , wood pellets machine , dust separation plant and packaging machine)

production line of making coal ball briquette(includingvertical crusher, mixing machine, coal briquette pressing machine and dryer machine for coal briquette)

and other equipment such as screw conveyor, belt conveyor, scrap conveyor , sawdust carbonization stove, floating fish feed machine and so on.

Our machines have the best quality and we have got many certification such as CE, ISO, BV.

Certifications

Customer Photos

About me