Yawing horizontal axis wind generator 25kw
Negotiable
Min.Order:1
Trade Assurance! 25kw wind turbine manufacture with wind energy system for 25kw wind generator Grid tied system
FD12-25kw wind turbine main body: US$8000.00/set
( Including 3 pcs blades, nose cone, hub, generator, manual brake system, nacelle, tail rod, tail vane.)
PWM controller with dump load, inverter, tower price will provided seperately.
User can take whole system from us, also can take any part of the system from us.
1. 25kw wind turbine normal data
Horizontal axis, directly drive, fixed blades pitch/pitch controlled, upwind wind wind turbine
For farm, small village use
FD12-25kw wind turbine work in low average wind speed place;
FD10-25kw wind turbine work in rich average wind speed place;
12m blades rotor wind turbine, rated wind speed is 10m/s. suitable for the lower average wind speed.
Model: | FD10-25kw |
Rotor Diameter: | 10m |
Number of Blades: | 3pcs |
Material of Blades: | Fibre glass expoxy |
Cut-in wind speed: | 3m/s |
Working wind speed: | 4-30m/s |
Survival wind speed: | 50m/s |
Rated wind speed: | 12m/s |
Rated rotate speed: | 180r/min |
Rated output power: | 25kw |
Max output power: | 30kw |
Type of tower: | Manganese steel independence tower |
Type of generator: | Permanent-magnet 3 phase AC |
Speed regulation method: | Yaw |
Stop method: | Brake by hand drag |
Working voltage: | DC500V |
Tower height: | 15m or special request |
Wind turbine main body weight: | 1700kg |
Measurement(CBM): | 6.1CBM (wind turbine main body and controller) |
Life span: | 20 years; |
Warranty: | 3 years |
Working system: | on/off grid working system |
Model: | FD12-25kw |
Rotor Diameter: | 12m |
Number of Blades: | 3pcs |
Material of Blades: | Fibre glass expoxy |
Cut-in wind speed: | 3m/s |
Working wind speed: | 4-30m/s |
Survival wind speed: | 50m/s |
Rated wind speed: | 10m/s |
Rated rotate speed: | 160r/min |
Rated output power: | 25kw |
Max output power: | 30kw |
Type of tower: | Manganese steel independence tower |
Type of generator: | Permanent-magnet 3 phase AC |
Speed regulation method: | Yaw |
Stop method: | Brake by hand drag |
Working voltage: | DC500V |
Tower height: | 15m or special request |
Wind turbine main body weight: | 1850kg |
Measurement(CBM): | 7CBM (wind turbine main body and controller) |
Life span: | 20 years; |
Warranty: | 3 years |
Working system: | on/off grid working system |
Blades, hub for the wind turbine
Wind turbine assembly
3. Wind turbine freatures
1. Blade: Manufacturing according to the airscrew structure principle and techniques. |
Optimal wide TSR & High L/D ratio. With protection film on the edge, long work life. |
Select blade type by wind tunnel testing. |
With high efficiency, low noise. |
2. Blades rotor: Hub adopts casting molding; Blades rotor and generator adopt universal connection, directly driven. |
Connection is reliable, durable, smooth operation without vibration. |
3. Generator |
Rotor: Nd-Fe-B permanent magnet. Prefabricated tangential magnetic circuit rotor; High magnetic flux density, small |
cubage, good manufacturing process and high performance. |
Adopt SKF, NSK bearing. |
Close transmission slip ring, the cable will not enlace. |
4. Speed regulation: yaw. Simple, reliable and safety. |
5. Anti-corrosion treatment: All the outside parts are designed to anti-salt, anti-fog, anti-atmospheric |
anti-sandstorm corrosion design. |
6.Tower: guy wire tower, tilting up tower, standalone tower, hydraulic tower… It can be designed according to your request. |
7. 300w-2.5kw auto braking; 3kw-30kw auto braking system and manual braking system. |
8. Wind turbine design principle is simple, safety, reliable, maintenance free. |
9. Provide low wind place, rich wind place solution. Wind turbine OEM service. |
4. Working system
Wind turbine on grid system: 25kw wind turbine with tower + PWM on grid controller with dump load + 2 sets 15k grid tie inverter with isolation transformer/or one 27k ABB grid tie inverter.
Wind turbine off grid working system:
25kw wind turbine with tower + PWM off grid charge controller with dump + battery group + 30kva pure sine wave inverter;
Wind solar hybrid off grid system, diesel or grid power as backup power
5. 25kw fixed pitch wind turbine advantage
Fixed pitch wind turbine 25kw including: 3 pcs FRB blades, nose cone, hub, generator with manual brake parts, nacelle, tail rod, tail vane.
Home, farm, signal station, island, garden...
7. Blades,pma
Vacuum mould blades with protection film
C.W blades, low noise level, high efficiency
FRB material, 3 pcs blades per set
Adjust blades rotor balance before delivery
Iron cast housing made by losting mould. Beautiful and antirust. Rare earth material, high efficiency and low start up torque
9. Tower type: stand lone tower, hydraulic tower (optional)
Tower height can be manufacture according to user's request.
The tower with hot-galvanize.
We provided the tower foundation drawing after confirm the tower type, tower height.
10. Matched controller
Controller converts 3 phase AC power to Dc and charge to the battery group or feed to the grid tie inverter.
Controller with auto brake function, PWM voltage stablization function.
Matched with off grid single phrase/ 3 phase pure sine wave inverter.
On grid system grid tie inverter ABB power one inverter, our provided grid tie inverter.
Power of the equipped wind turbine (W) |
30K |
Operating mode |
Continuous |
Function |
Commutation, control |
Operating environment |
Temperature -30~60℃, humidity≤80% |
PWM unloading voltage (DCV) |
≥500V |
three-phase dump load 1 voltage (DCV) |
515±5V |
three-phase dump load 2 voltage (DCV) |
520±5V |
three-phase dump load 2 delay time (min) |
10-20 minutes |
Low voltage indicator (V) |
≤130V |
Self-provided connecting wire of the three-phase dump load 1(mm²) |
>12mm² |
Self-provided connecting wire of the three-phase dump load 2 (mm²) |
>12mm² |
Self-provided connecting wire of the PWM dump load(mm²) |
>12mm² |
PWM unloading fuse (A) |
63A |
DC output fuse (A) |
100A |
11.Inverter for on/off grid system:
Matched (3 phase )grid tie inverter 15k*2 sets, add isolation transformer between two grid tie inverter. pure sine wave inverter single phase/ 3 phase
Inverter output voltage, frequency can be manufactured according to different countries request.
pure sine wave inverter single phase 30kva
Other fixed pitch wind turbine model list:
Model | Working voltage |
FD2.2-300W | DC24V |
FD2.5-500W | DC24V |
FD2.8-1KW | DC24V/DC48V |
FD3.2-1.5kw | DC24V/DC48V |
FD3.2-2KW | DC24V/DC48V |
FD3.8-2.5kw | DC48V |
FD4-3KW | DC48v |
FD4-4KW | DC120v |
FD5-5KW | DC120v |
FD8-10KW | DC120V |
FD8-15kw | DC240 |
FD10-15KW | DC240V |
FD10-20KW | DC500V |
FD10-25KW | DC500V |
FD12-30KW | DC500V |
FD2.8-500W | DC24V |
FD3.2-1KW | DC24V/DC48V |
FD3.8-2KW | DC24V/DC48V |
FD6-5KW | DC120V |
FD10-10KW | DC120V |
FD12-20KW | DC500 |
plywood case/soft packages
Delivery by sea. FOB/C&F, CIF
Delivery via LCL, 40' CONTAINER
Normally we delivery the products by sea. If you need us check the delivery cost, pls let us know the destination port to you. Then we will check the delivery cost accordingly.
Item | Description | Packing | G.W(Kg) | ||
Packing method | outside size(m) | ||||
1 | Hub,nose cone and under cover | plywood box | 0.55 | 150 | |
2 | Generator/rotor body | plywood box | 1.77 | 890 | |
3 | Blades | plywood box | 2.09 | 390 | |
4 | Tail vane | Tail vane plate | plywood box | 0.85 | 255 |
Tail vane frame | |||||
Giant-shaped steel & others | |||||
5 | Tail rod | soft package | 0.25 | 75 | |
6. | On grid controller | carton | 0.10 | 30 | |
7. | Unload box | carton | 0.46 | 77 | |
8 | grid tie inverter | plywood box | 0.99 | 400 | |
TTL: | 7.07 | 2267 |
25kw 15m stand alone tower with accessory: |
3 pcs,5.5m/bottom part,middle part 5m,upper part4.5m,Instert together |
Total packing size is 13cbm. 1750kgs |
Provide professional wind turbine technical support;
Provide on/off grid system design, wind solar hybrid system design service.
Completely system provider and designer;
Wind turbine type, model, capacity selection professional support;
Tower design, foundation drawing support;
Provide Pma, hub, flange drawing;
Provide OEM service, customized service.
Support paypal /west union payment, TT payment;
We started to manufacture wind turbine in 1994. In 2004, there are only 4 small wind turbine manufactures in China. We keep improving and develop in the small wind turbine field. We are not the leading small wind turbine exporter, but we are the leading wind turbine manufacture and designer now.
We manufacture 300w-30kw fixed pitch wind turbine;
2kw, 3kw, 5kw, 10kw, 20kw, 30kw, 50kw, 60kw pitch controlled wind turbine;
On grid system/off grid system, wind solar hybrid system; Water heating system;
For more details, pls contact with us via e-mail.
1. Wind turbine model selection
It depends your local annual average wind speed, daily/monthly home power consumption.
Low average wind speed place, select larger blades rotor, higher rated working voltage;
Rich wind place select speed limited wind turbine: variable pitch wind turbine, stall out vertical axis wind turbine.
The safety and steady working system is the first choice.
2. Wind turbine tower selection
Now we have guy wire tower, stand alone tower, tilting up tower, hydraulic tower.
Guy wire tower cost is lower, easy to delivery. But the installation area is larger;
Tilting up tower is for 500w-5kw wind turbine. Easy installation, small installation area. But the delivery cost is higher.
Hydraulic tower: It is used for no crane place. Easy installation and put down. The cost is higher.
Stand alone tower for the installation place with crane.
The tower height: Make sure blades rotor is higher than wind turbine surrounding barrier height.
3. Working system selection
On grid system: wind turbine with tower + PWM controller with dump load + grid tie inverter;
Off grid system: wind turbine with tower + PWM charge controller with dump load + battery group + inverter;
Wind solar hybrid on/off grid system: Safety and reliable than only wind or solar system.
Wind turbine water heating system: work in rich wind place. Average wind speed higher than 8m/s.
For more question, pls contact with us directly. We will give you a professional response.
Why select us:
We are the wind turbine designer and manufacture. We know our wind turbine advantage and disadvantage in different wind condition.
I have more than 10 years wind turbine sales experience. We provide the right wind turbine and working system to different user according to their different situation and request.
In 2004, there are 4 small wind turbine manufacture. Now there are so much trading company and manufacture, we know Chinese small wind turbine market well and can provide user more useful advise.