Main Products: , , ,
FD4-3000w generador eolico
Negotiable
Min.Order:1
Product Details
RELIABLE! safety wind generator 3kw, 3kw wind turbine manufacture type centrifugal pitch controlled wind power
3kw variable pitch wind turbine main body: US$2300.00/set
| Model | wind turbine Main body | Controller | Tower height | Tilting up tower | Pure sine wave inverter |
| FD4-3KW | US$2,100.00 | US$300.00 | 8m | US$417.00 |
1.3kw Centrifugal pitch wind turbine introduce
Wind speed control blades angle changing. The blades angle twists according to the wind speed, this will change the blades itself aerodynamic characteristic to control wind turbine rotation speed. This will make the generator output power constantly.
2. 3kw pitch control wind generator spec
| Item | FD4.0-3.0KW |
| Rotor diameter (m) | 4 |
| Blade material | Reinforced FRP |
| Blade number | 3 |
| Rated wind speed(m/s) | 9 |
| Start-up wind speed (m/s) | 3 |
| Working wind speed (m/s) | 3.0-25 |
| Survival wind speed(m/s) | 40 |
| Starting torque (n/m) | 2.3 |
| Speed adjustment mode | Pitch changed |
| Stop method | Manual mechanical brake, electromagnetic brake |
| Generator type | Three phase ,permanet magnet, AC generator |
| Rated power | 3KW |
| Max.power | 3.6KW |
| Rated rotate speed (r/min) | 300 |
| Working voltage | DC24V-300V |
| Main body weight(kg) | 140 |
Blades:
Vacuum mould blades with protection film
C.W blades, low noise level, high efficiency
FRB material, 3 pcs blades per set
Adjust blades rotor balance before delivery
3 phase 3kw permanent magnet generator:
3. Output power curve
4. variable pitch wind turbine 3kw features
Blades rotor: Blades rotor efficiency can reach 0.42. Noise level is less than 65db, and balance adjustment
has been
carried out strictly before leaving factory.
Generator: Blades rotor drives directly. Lower rotation speed, PMG synchronous generator, over load
capacity is 150%.
Pitch controlled wind turbine: Adopt stable pitch controlled system, can be used in variable environments
Low failure rate
Speed regulates Performance: The precision of pitch controlled system is 10 r/min, and never over speed
at gale.
Low Start up Wind Speed: According to different wind conditions, adjust the blade initial angle to make wind turbine
start up at low wind speed.
The start-up wind speed is ≤3m/s.
Manual brake: Reliable braking system, easy to operate, can stop wind turbine at any time.
Automatically undo cable: slip rings undo the cable automatically. Ensure the cable has not twist. Double
carbon brushes structure make sure power transfer without failure.
Well-adapted Wind turbine: The operation wind speed is 3-30m/s.
5. working system
Off grid system:
On grid wind power system
Wind turbine on grid system: wind turbine with tower + PWM on grid controller with dump load + grid tie inverter
(solar panel, grid power, diesel generator can be backup power)
wind solar off grid system
wind solar on grid system
On grid system wiring diagram
Matched controller
Controller converts 3 phrase AC power to Dc and charge to the battery group or feed to the grid tie inverter.
Controller with auto brake function, PWM voltage stablization function.
Matched with off grid single phrase/ 3 phase pure sine wave inverter.
On grid system grid tie inverter ABB power one inverter, our provided grid tie inverter.
|
Type |
3KW |
|
Wind turbine rated power |
3KW |
|
Wind turbine Max. power |
6KW |
|
Function |
Rectifier, control, dc output |
|
Display mode |
LCD |
|
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, DC output voltage, output current, output power |
|
PWM constant voltage |
≥380dc |
|
3-phase dump load voltage of the wind turbine |
410±5Vdc |
|
Time-lapse of the wind turbine 3-phase dump load |
12-20 min |
|
Low-voltage |
≤200Vdc |
|
PWM dump load fuse |
10A |
|
Fuse of DC output |
16A |
|
Work environment temperature |
-30-60°C |
|
Relative humidity |
<90% No condensation |
|
Noise (1m) |
<40dB |
|
Degree of protection |
IP20(Indoor) |
|
Cooling method |
Forced air cooling |
|
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
|
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
|
Size of the controller |
575*430*320 mm |
|
Weight of the controller |
20Kg |
|
Size of the dump load |
495*460*320 mm |
|
Weight of the dump load |
17Kg |
|
Type |
3KW-24Vdc |
3KW-48Vdc |
3KW-96Vdc |
|
Wind turbine rated power |
3KW |
3KW |
3KW |
|
Wind turbine max. power |
6KW |
6KW |
6KW |
|
Solar panel |
900W |
900W |
900W |
|
Battery |
24Vdc |
48Vdc |
96Vdc |
|
Function |
Rectifier,charge, control |
||
|
Display mode |
LCD |
||
|
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current |
||
|
PWM constant pressure voltage |
>28Vdc |
>56Vdc |
>110Vdc |
|
3-phase load voltage of the wind turbine |
29±1Vdc |
58±1Vdc |
116±2Vdc |
|
Recovery charging voltage of the wind turbine |
27±1Vdc |
54±1Vdc |
108±2Vdc |
|
Stop charge voltage of solar panel |
29±1Vdc |
58±1Vdc |
116±2Vdc |
|
Recovery charging voltage of solar panel |
<28Vdc |
<56Vdc |
<110Vdc |
|
Low-voltage of the battery |
20±1Vdc |
40±1Vdc |
80±2Vdc |
|
Self-provided connecting wire of the battery |
>30mm² |
>12mm² |
>6mm² |
|
PWM fuse |
125A |
80A |
32A |
|
Charging fuse |
160A |
100A |
50A |
|
Work environment temperature |
-30-60°C |
||
|
Relative humidity |
<90% No condensation |
||
|
Noise (1m) |
<40dB |
||
|
Degree of protection |
IP20(Indoor) |
||
|
Cooling method |
Forced air cooling |
||
|
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
||
|
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
||
|
Size of the controller (mm) |
655*480*320 |
575*430*320 |
575*430*320 |
|
Weight of the controller |
27 Kg |
21Kg |
21Kg |
|
Size of the load (mm) |
495*460*320 |
495*460*320 |
495*460*320 |
|
Weight of the load |
16Kg |
16 Kg |
16 Kg |
|
Type |
3KW-120Vdc |
3KW-220Vdc |
|
Wind turbine rated power |
3KW |
3KW |
|
Wind turbine max. power |
6KW |
6KW |
|
Solar panel power |
900W |
900W |
|
Battery |
120Vdc |
220Vdc |
|
Function |
Rectifier,charge, control |
|
|
Display mode |
LCD |
|
|
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current |
|
|
PWM constant pressure voltage |
>140Vdc |
>250Vdc |
|
3-phase load voltage of the wind turbine |
150±2Vdc |
260±2Vdc |
|
Recovery charging voltage of the wind turbine |
138±2Vdc |
240±2Vdc |
|
Stop charge voltage of solar panel |
150±2Vdc |
260±2Vdc |
|
Recovery charging voltage of solar panel |
<140Vdc |
<250Vdc |
|
Low-voltage of the battery |
100±2Vdc |
180±2Vdc |
|
Self-provided connecting wire of the battery |
>4mm² |
>2.5mm² |
|
PWM fuse |
25A |
10A |
|
Charging fuse |
32A |
16A |
|
Work environment temperature |
-30-60°C |
|
|
Relative humidity |
<90% No condensation |
|
|
Noise (1m) |
<40dB |
|
|
Degree of protection |
IP20(Indoor) |
|
|
Cooling method |
Forced air cooling |
|
|
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
|
|
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
|
|
Size of the controller (mm) |
575*430*320 |
575*430*320 |
|
Weight of the controller |
21Kg |
21Kg |
Matched Inverter:
Matched grid tie inverter 3kw/5kw, pure sine wave inverter single phase
Inverter output voltage, frequency can be manufactured according to different countries request.
Grid tie inverter from ABB, Ginlong,BOS...
Wind turbine tilting up tower:
Tower type: guy wire tower, stand lone tower, tilting up tower, hydraulic tower (optional)
Tower height can be manufacture according to user's request.
The tower with hot-galvanize.
We provided the tower foundation drawing after confirm the tower type, tower height.
Tower type optional;
Tower height optional
Pitch control wind turbine ( 3kw-60kw ), models are as follows:
|
Model
|
Rated power |
Max Power |
Rotor diameter |
|
BFD 3.8-2KW
|
2000w |
3000w |
3.8m |
|
BFD 4-3KW
|
3000w |
4500w |
4m |
|
BFD 5-5KW
|
5000w |
7500w |
5m |
|
BFD8-10KW
|
10kw |
17kw |
8m |
|
BFD12-20KW
|
20KW |
30KW |
12m |
|
BFD 12-30KW
|
30KW |
35KW |
12m |
|
BFD 14-30KW
|
30KW |
40KW |
14m |
|
BFD 17-50KW
|
50KW |
60KW |
17m |
|
BFD23-50KW
|
50KW |
65KW |
23m |
|
BFD 23-60KW
|
60KW |
75KW |
23m |
Application:
Wind turbine main body, blades, pma, tail, controller, inverter: plywood case
Tower: soft packages
Delivery by sea, by air or express.
FOB/C&F, CIF
500w-3kw wind turbine : 3-5 working days after payment
5kw-30kw wind turbine: 7-10 working days after payment
50kw-60kw 15-20 days after payment
Tower needs about 10 working days after payment
Provide professional wind turbine technical support;
Provide on/off grid system design, wind solar hybrid system design service.
Completely system provider and designer;
Wind turbine type, model, capacity selection professional support;
Tower design, foundation drawing support;
Provide Pma, hub, flange drawing;
Provide OEM service, customized service.
Support paypal /west union payment, TT payment;
For more details, pls contact with us.
Contact person: Aron wang
skype: chinaaron
We started to manufacture wind turbine in 1994. In 2004, there are only 4 small wind turbine manufactures in China. We keep improving and develop in the small wind turbine field. We are not the leading small wind turbine exporter, but we are the leading wind turbine manufacture and designer now.
We manufacture 300w-30kw fixed pitch wind turbine;
2kw, 3kw, 5kw, 10kw, 20kw, 30kw, 50kw, 60kw pitch controlled wind turbine;
1kw, 2kw, 3kw, 5kw Vertical axis wind turbine;
On grid system/off grid system, wind solar hybrid system; Water heating system;
For more details, pls contact with us via e-mail.
Certification
Workshop, office and stock
1. Wind turbine model selection
It depends your local annual average wind speed, daily/monthly home power consumption.
Low average wind speed place, select larger blades rotor, higher rated working voltage;
Rich wind place select speed limited wind turbine: variable pitch wind turbine, stall out vertical axis wind turbine.
The safety and steady working system is the first choice.
2. Wind turbine tower selection
Now we have guy wire tower, stand alone tower, tilting up tower, hydraulic tower.
Guy wire tower cost is lower, easy to delivery. But the installation area is larger;
Tilting up tower is for 500w-5kw wind turbine. Easy installation, small installation area. But the delivery cost is higher.
Hydraulic tower: It is used for no crane place. Easy installation and put down. The cost is higher.
Stand alone tower for the installation place with crane.
The tower height: Make sure blades rotor is higher than wind turbine surrounding barrier height.
3. Working system selection
On grid system: wind turbine with tower + PWM controller with dump load + grid tie inverter;
Off grid system: wind turbine with tower + PWM charge controller with dump load + battery group + inverter;
Wind solar hybrid on/off grid system: Safety and reliable than only wind or solar system.
Wind turbine water heating system: work in rich wind place. Average wind speed higher than 8m/s.
For more question, pls contact with us directly. We will give you a professional response.
Why select us:
We are the wind turbine designer and manufacture. We know our wind turbine advantage and disadvantage in different wind condition.
I have more than 10 years wind turbine sales experience. We provide the right wind turbine and working system to different user according to their different situation and request.
In 2004, there are 4 small wind turbine manufacture. Now there are so much trading company and manufacture, we know Chinese small wind turbine market well and can provide user more useful advise.
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln